Xhorse VVDI MB NEC Key Adaptor

Original NEC Key Adaptor Compatibility

Works Seamlessly with VVDI MB BGA Tool

No soldering, no wire jumpers, and no additional adaptors required.

Ongoing Support for More Versions

• Supports V51 and V57 versions for direct password retrieval.
• Supports on-board renewal for normal keys: V28, V35, V40, V51, V57.
• Supports on-board renewal for keyless go keys: V03, V06, V07, V08, V09, V61.
• Supports writing key files via IR or on-board for normal keys: V28, V35, V40, V51, V57.
• Supports writing key files via IR or on-board for keyless go keys: V03, V05, V06, V07, V08, V09, V59, V61.

All the above keys use an NEC chip (non-BGA type). To use the adaptor:

• You must desolder the NEC chip from the key and place it onto the NEC adaptor.
• For NEC V51 and V57 versions, you can read the password directly from a working key—no need to retrieve it from the EIS.
• For all NEC key types, you must use the “Identification key” function to read the key once before performing a renew or write operation.

How to place the NEC key chip onto the adaptor for read/write/renew operations:

Important Notes

The NEC Key Adaptor is optional. An ESL renewal adaptor is currently under development and will be released at a later date.

Package Contents

• 1 x VVDI MB NEC Key Adaptor