ECU Chip Tuning Tools

Iprog+ Pro Programmer V84 Odometer Correction Airbag Reset and ECU Programming Tool Replace Carprog Digiprog3 Tango Supports till Year 2019

Item No. COBD21140 Iprog+ Pro V84 Odometer Correction and car key programmer,it can also support Airbag,carradio,dpf off, ECU,IMMO KEY, MIL TO KM, PINABS,PINCODE SMATRA3,PINCODE SENSOR SPEED LIMIT,ODO Adjust,EEPROM,MCUAtmel,Fujutsu,Microchip,Motorola,Motorola912EN,NECV850,BLR,CAN,CRC-Cript,ibutton,sd-unlocker,test.

Carprog ECU Chip Tuning Tool Full V10.93 With All 21 Adapters Including Much More Authorizations

Item No. COBD21127 V10.93 CARPROG with All 21 Adapters,Contains much more authorizations than V4.74 or other lower version. no needs activation.

Online Version Kess V2 V5.017 with Red PCB Supports 140 Protocol No Token Limited

Item No. COBD21178 KESS 5.017 Red PCB Firmware, Supports Online connection, No Token Limited

Xprog M 5.84 XPROG-M Box 5.8.4 Xprog Auto ECU Programmer with USB Dongle

Item No. COBD21128 Xprog V5.84 adds new authorizations: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9

KTAG V7.020 Red PCB Firmware K-TAG 7.020 Master Software V2.25 EU Online Version No Tokens Limitation

Item No. COBD21129 Online EU RED KTAG 7.020 K tag V7.020 V2.25 Online Master KTAG V7.020 K-TAG ECU Chip Tuning For Car Truck,with Red PCB.

KTM FLASH KTMFLASH Car ECU Programmer Supports V-A-G DQ200 DQ250 Infineon Bosch

Item No. COBD21131 KTM FlASH ECU programmer supports V-A-G DQ200 DQ 250 DQ500 VL381 DL501 Transmission, read Chinese car eeprom via OBD, read Infineon via boot mode,supports Chinese car ME17 TC1728/1767 data reading & writing and password reading.

New FGTECH Galletto V54 Firmware 0475 EU Version Supports Newer Vehicles

Item No. COBD21141 <strong>New FGTECH Galletto V54 Firmware 0475 EU Version Supports Newer VehiclesFGTECH 0475 Specification</strong>Firmware: FGTECH <span>0475</span>Software Version:V2012Update:By linkCar Models:For both cars,trucks...Languages:English, Spanish, French, Italian, German, Czech, Portuguese, TurkishFun...

Tactrix Openport 2.0+ECUFLASH ECU Flash Cable with Brand-New Full Chip

Item No. COBD21159 The OpenPort 2.0 combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress.

Foxwell NT624 Elite OBD2 EOBD Automotive Scanner Full System Code Reader EPB Oil Reset OBD 2 Auto Scanner Car Diagnostic Tool

Item No. UOBD2624 Foxwell NT624 Elite is a new full system car scanner,horizontal screen design, hand-held operation, easy to use. it offers techinicians and enthusiasts an easy and affordable solution to pinpoint troubles of all system on major American, Asian and European makes. In addition, the oil light reset and EPB sevice features are big plus.

Scania Diagnos & Programmer 3 2.43 Scania SDP3 V2.43 without Dongle

Item No. SH58-S8 Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines. The program has been developed to support the electrical system with CAN communication.
After complete the payment, we will send you the download link, you can also send us the teamviewer ID and passwrod, our engineer will help you install Scania SDP3 V2.43.

Brand New Mercedes Benz ME9.7 ME 9.7 ECU ECM Engine Computer Compatible with all series of 237 engine 4.6L 4633CC V8/ 5.5L5641CC V8

Item No. COBD23463 Mercedes ME9.7 ME 9.7 ECU ECM Engine Computer Programming Meanwhile, compatible with all series of 237 engine 4.6L 4633CC V8/ 5.5L5641CC V8

MPPS V18 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable Firmware 1.09.03​​​​​​​ With Checksum and ECU Recovery

Item No. COBD21130 MPPS V18 module adds support for advanced functions on Marelli ECU’s. MPPS covers a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic and many others…

OEM Orange5 Professional Programming Device Hardware without Adapters

Item No. COBD21150 Orange 5 is a professional programming device for memory and microcontrollers. Unique feature of the current series programmers is built-in macro language for writing down protocols, which gives fast and easy capability to add new types of micro schemes, precisely meeting manufacturers' requirements to read/write algorithms.

KESS V2 V5.017 Red PCB Firmware EU Version V2.47 Supports Online Connection No Token Limited

Item No. COBD21132 KESS 5.017 Red PCB Firmware, Supports Online connection, No Token Limited, free shipping with best price.

Carprog Full Perfect Online Version Firmware V8.21 Software V10.93 with All 21 Adapters Including Full Authorization

Item No. COBD25777 Carprog Full Perfect Online Version Firmware V8.21 with All 21 Adapters, contain much more authorization than other CARPROG. Latest Software Version: V10.93.

2020 OEM Orange5 Plus V1.35 Programmer With Full Adapter Enhanced Functions with USB dongle

Item No. COBD25772 2020 OEM Orange5 Plus V1.35 Programmer With Full Adapter Enhanced Functions with USB dongle

Newest V1.87 Renolink OBD2 ECU Programmer for Renault

Item No. COBD25738 Renolink OBD2 for Renault ECU ProgrammerLatest Version V1.87Software Language: French + Englishvirginiser of steering assitst for Renault Megane 4, Renault Scenic 4, Renault Kadjar and Renault Talisman.Codding will do automatically at the first ignition.Also database from december 2019 was added.

V84 Iprog+ Pro Programmer Support IMMO + Mileage Correction + Airbag Reset

Item No. COBD25636 V84 Iprog+ Pro Key Programmer Support IMMO + Mileage Correction + Airbag Reset

Universal RDIF Adapter for Iprog+ Programmer

Item No. COBD25987 Universal RDIF Adapter for Iprog+ Programmer

Cheap Probes Adapter for IPROG+ for in-circuit ECU Work with Iprog+ Programmer and Xprog

Item No. COBD26159 Cheap Probes Adapter for IPROG+ for in-circuit ECU Work with Iprog+ Programmer and Xprog.

Wabco Diagnostic Software Wabco TEBS-E 5.50 + PIN Calculator + New Activator English and German Version

Item No. COBD26162 Only Software without Hardware, after payment, we wil send you the download link.
WABCO System Diagnostics (SD) consists of a range of Windows based software solutions and all the hardware necessary to carry out diagnostic work on every WABCO system.

V84 iprog+ Pro Programmer with Probes Adapters for in-circuit ECU Free Shipping

Item No. COBD25719 V84 Iprog+ Pro Programmer with Probes Adapters for in-circuit ECUMake your job much easier without soldering.

2019 New Arrival CGDI AT-200 AT200 ECU Programmer & ISN OBD Reader for BMW

Item No. COBD25608 BMW AT-200 support BMW ECU Data reading, writing and clone, like MSV90 MSD85 MSD87 N2055 B38 B48Support BMW IMMO functions, read BMW ISN Code by OBD. Original from CGDI, Free update online.

35080/160 Adapter for Iprog + Iprog Pro ECU Programmer

Item No. COBD26160 35080/160 Adapter for Iprog + Iprog Pro ECU Programmer.

Carprog FULL V10.93 Blue Interface with 21 Adapters Supports EEPROM and Microcontroller,Car Radios, Dashboards, Immobilizers Repair

Item No. COBD21206 CARPROG Full V10.93 Blue Interface (with all Software's activated and all 21 items Adapters), was designed with regard to demands of our customers to have universal tool for car radios,odometers immobilizers repair including advanced functions like EEPROM and microcontroller programmer, key transponder programmer.

Perfect Version LED BDM Frame With 4 Probes Mesh For Kess Dimsport K-TAG

Item No. COBD21221 BDM Frame with Adapters Set made of HQ stainless steel is suitable for BDM Programmer/CMD 100/KESS V2/Ktag/ Fgtech.BDM Frame with Adapters Work for KESS V2/Ktag/ Fgtech

High Quality and Simple LED BDM Frame with Mesh and 4 Probe Pens for FGTECH BDM100 KESS KTAG K-TAG ECU Programmer Tool

Item No. COBD24962 High Quality Probe Pens LED BDM Frame works with FGTECH, BDM100, KESS, KTAG ECU programming tool. LED is compatible with 12V vehicles, after you connect with the probe, disconnect 12V battery for LED, it will work. The probe pin is adjustable. No PCB in this package!

MPPS V21 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable

Item No. COBD21313 MPPS V21 MAIN + TRICORE + MULTIBOOT with Breakout Tricore CableWarranty: one yearLatest Software version: V18.12.3.8Package comes with Breakout Tricore cable.

Kess V2 V5.017 SW V2.47 Red PCB EU Online Version Plus Ktag 7.020 SW V2.25 Red PCB EURO Online Version Get Free V1.61 ECM TITANIUM

Item No. COBD25774 Kess V5.017 EU Version with Red PCB Online Version Support 140 Protocol No Token Limited Plus KTAG V7.020 Red PCB Firmware K-TAG 7.020 Master Software V2.23 EU Online Version No Tokens Limitation

Original Wellon VP-698 VP698 Universal Programmer

Item No. COBD21222 VP-698 Universal Programmer is replacement and upgrade version of VP-498.Original Wellon programmer with high quality.

KTAG V7.020 Firmware Ksuite V2.23 ECU Programming Tool Master Version No Tokens Limitation

Item No. COBD21165 Top 3 reasons to get KTAG V7.020 master ecu programmer:1. With latest Firmware version: V7.0202. -Many encrypted new car models works I.E Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU, Toyota 76F, etc, at least 100 more ECU Types3. No tokens limitation

KTM FLASH 1.95 ECU Programmer & Transmission Power Upgrade Tool

Item No. COBD24959 KTM FLASH 1.95 ECU Programmer & Transmission Power Upgrade Tool

OEM Orange 5 Orange5 Professional Programming Device Supports WINXP/WIN7/WIN8 with Full Packet Hardware plus Enhanced Version Software

Item No. COBD21288 Orange 5 is a professional programming device for memory and microcontrollers. Unique feature of the current series programmers is built-in macro language for writing down protocols, which gives fast and easy capability to add new types of micro schemes, precisely meeting manufacturers' requirements to read/write algorithms.

V-a-gtacho USB Version V 5.0 V-A-G Tacho 5.0 for NEC MCU 24C32 or 24C64 Buy SE77-B Instead

Item No. COBD21186 V-A-G Tacho USB Version V 5.0 is a V-A-G Kombiinstrument / Immo box eeprom programmer and support Windows 7, Vista, Win XP, Win 98. Free shipping, and obdii365 always provide you the best price.

Latest Version Xprog V6.12 XPROG-M ECU Programmer With USB Dongle Free Shipping

Item No. COBD21296 XPROG-M V6.12 ECU Programmer With USB Dongle, No need activation.With new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9.