Yanhua ACDP-2 BMW Full Package with Module 1/2/3/4/7/8/11 + License for BMW Key Programming Cluster Correction Get Free B48/ N20/ N55/ B38 Bench Board

Yanhua Mini ACDP Programming Master – BMW Full Package with Module 1/2/3/4/7/8/11 (7 Authorizations)

Included Components

1. Yanhua Mini ACDP Master Host
Supports 93 / 24 / 25 / 35 / 95 series EEPROM in-circuit programming (ICP) and on-board programming (OBP), as well as select Freescale / NEC MCU in-circuit programming (ICP). This module serves as the essential base unit for all additional modules.

2. CAS Module (Module 1)
- Supports CAS1–CAS3+ immobilizer key programming via OBD or ICP, mileage reset, and EEPROM/FLASH read/write.
- Supports CAS4/CAS4+ immobilizer key programming via ICP, mileage reset, and EEPROM/FLASH read/write.
- New OBD functionality added for CAS4/CAS4+.

3. FEM/BDC Module (Module 2)
Enables FEM/BDC immobilizer key programming via ICP or OBP, mileage reset, and data backup/recovery.

4. ISN Module (Module 3)
- Read/write ISN codes for N20, N55, and N13 engines via OBD.
- Read/write MSV80/MSD85 ISN codes without opening the DME shell.
- Read/write other DME ISN codes by opening the DME shell.

5. EEPROM Read/Write Module (Module 4)
Reads and writes BMW M35080, 35160DO WT, and similar EEPROMs. Erase support for 080DOWQ, 080DOWT, 160DOWQ, 160DOWT, and M35128 models.

6. Key Refresh Module (Module 7)
Refreshes BMW E-chassis and F-chassis keys to enable repeated use.

7. FRM Footwell Module (Module 8)
Reads and writes EEPROM/FLASH data from the BMW FRM (Footwell Module) 0L15Y chip and 3M25J chip (including D-FLASH and P-FLASH).
Advantages: All-in-one data reading, writing, and conversion; no need to handle other vehicle data or perform coding—simple and efficient.

8. EGS ISN Clear Module (Module 11)
Application: Designed for BMW 6HP/8HP transmission systems.

Key Features of Yanhua Mini ACDP

• No engine required during testing
• No soldering iron needed for BMW key programming
• Eliminates soldering tasks for automotive locksmiths
• World’s first programming tool that operates without soldering

IMMO & Mileage Programming Capabilities

• No need to remove chips
• No soldering required
• No wire cutting
• No pin lifting

Module-Specific Functions

Module 1: BMW CAS1–CAS3+ (OBD Programming)

• Read CAS EEPROM
• Add keys
• Reset mileage
• Backup or recover CAS data
• Recover from All keys lost scenarios

Module 1: BMW CAS4/CAS4+

• Read CAS4 EEPROM without soldering
• Add keys without soldering
• Reset mileage without soldering
• Backup or recover CAS without soldering
• Recover from All keys lost scenarios without soldering

Module 2: BMW FEM/BDC

• All keys lost recovery without soldering
• Add/delete keys without soldering
• Enable/disable keys without soldering
• Read key ID
• Repair or replace FEM module without soldering
• Reset mileage without soldering

Module 3: Read and Write ISN Code

Supported models: N20 (mevd1724, mevd172P, mevd1729), N13 (mevd1725), N55 (mevd172, mevd1726, mevd172G, mevd172S, MEVD17), MSV80, MSD81, MSD85, MSD85HY, MSD87, MSV90, MEVD1728 (s63), mev1722, med172, mevd1727, dde701_edc17c50, BMSX, and others.

Module 4: BMW M35080, 35160DO WT Read & Write

Read and write operations for BMW M35080, 35160DO WT, and related EEPROMs.

Module 7: BMW Key Refresh Function

Refreshes E-chassis and F-chassis BMW keys for reuse.
Reference guide: How to use Yanhua Mini ACDP to refresh BMW keys

Module 8: BMW FRM (Footwell Module)

Read and write EEPROM/FLASH data for 0L15Y and 3M25J chips in the FRM module.
Reference guide: How to use Yanhua Mini ACDP for BMW FRM programming

Module 11: Clear EGS ISN

Functions:

• Check EGS state
• Clear ISN
• Reset adaptation
• Backup coding
• Recover coding

Reference guide: How to use Yanhua Mini ACDP to clear EGS ISN on 6HP?

Package Contents – Yanhua Mini ACDP Master Basic Configuration

• 1pc x ACDP Programmer Master
• 1pc x OBP+ICP adapter
• 1pc x Puncture socket
• 1pc x P8P ribbon cable
• 1pc x 8P cable
• 1pc x 20P cable
• 1pc x 12V power adapter
• 3pcs x Paint surface cleaning needles (1.0mm, 0.8mm, 0.5mm)
• 1pc x BAV Key Adapter

Adapter List (Module 1 – SK247-1)

• 1pc x BDM01 adapter
• 1pc x BMW-CAS3 interface board
• 1pc x BMW-CAS4 interface board
• 1pc x BMW CAS2/3/4 interface
• 1pc x CAS3 firmware package
• 1pc x CAS4 firmware package

Adapter List (Module 2 – SK247-2)

• 1pc x FEM bridge
• 1pc x BDC bridge
• 1pc x Desktop OBD transfer board
• 1pc x BMW FEM/BDC test platform
• 1pc x Single-pin double-head cable
• 1pc x FEM bridge firmware package
• 1pc x BDC bridge firmware package

Adapter List (Module 3 – SK247-3)

• 1pc x BMW-N13 port board
• 1pc x N20 caliper for opening hole in shell
• 1pc x N13 firmware package of interface board

Adapter List (Module 4 – SK247-4)

• 1pc x Yanhua Mini ACDP Programming Master BMW 35080 & 35160DO Adapter

Adapter List (Module 7 – SK247-7)

• 1pc x BMW F chassis (HUFXXXX) Key interface board
• 1pc x BMW F chassis (5WKXXXX) Key interface board
• 1pc x BMW Key simulator
• 6pcs x BMW Key Refresh Module Copper Pillar Package (M2*14+3)

Adapter List (Module 8 – SK247-8)

• 1pc x BMW FRM module (FRM Footwell module), 0L15Y chip Interface board
• 1pc x BMW FRM module (FRM Footwell module), 3M25J chip Interface board
• 12pcs x BMW FRM module (FRM Footwell module), Copper pillar package (Single head six angle stud M2.5*12+6mm)

Adapter List (Module 11 – SK247-11)

• 1pc x BMW gearbox module interface board