Launch X431 CRP919E BT Car Diagnostic Tool DBScar VII VCI Auto OBD OBD2 Scanner Active Test ECU Coding CANFD DOIP 31+ Reset Services

1.Connect car via bluetooth with DBScar VII VCI,Bluetooth version of CRP919E

9. Exetend to work with FCA account (optional)
10. 23 language support: Italian, English, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Persian, Serbian, Finnish, Swedish, Czech, Simplified Chinese, chinese traditional

Notice:
UK/EU Version for UK/EU Countries customers, Global Version for Customers outside the UK and European countries

Other Optional Accessories You May Need:
VSP-600 VideoScope: To check unseen parts of the engine, fuel tank, braking system, etc.; Helps technicians to check issues on unreachable area in a vehicle. With 6 levels light strength, technicians can easily adjust the brightness according to the environment. It will work with Launch X-431 scanners or any Android device and streams live video on it. Technicians can view, record and save images and videos
Battery Tester (BST360): View the health status of the vehicle's battery and electrical system. Allow you to fix battery detection faster and easier
TPMS(X431 TSGUN): Work with X-431 diagnostic tools to expand new functions and generate new revenues for X-431 users, activate all 315/433MHz sensors, relearn & program LAUNCH sensors
DOIP Cable:for Devices with CAR VII Bluetooth Connectors

CRP919E BT vs CRP919E

LAUNCH X431 CRP919EBT ECU Coding function:

ECU Online Coding:

Online Coding functions directly connect to OEM server, quickly obtain the OEM online data from the server when the code data is lost, but Only Compatible with VW/ Audi/ Skoda/ Seat. Such as 1.Acoustical confirmation 2.Active Rear Spoiler 3.SiriusXM coding 4. Digital speedometer coding 5.Start & Stop button coding 6. Remote window control unlocking 7.Acoustic pedestrian protection 8.Active Cruise Control 9. Air conditioning setting memory 10.Automatic Air Recirculation 11.AMBient lighting brightness, And More .....

it is the only product in this price range that is compatible with CAN-FD protocol and supports the latest For GM vehicles manufactured after 2020. Adopts advanced CRC algorithms to accommodate more data from 8 to 64 bytes in the CAN frame, which runs faster than other products and reduces the risk of undetected errors to greatly enhance the user experience.

Supports For Chevrolet Onix 2020-2021 year

Supports For Chevrolet Tracker 2020 year

Supports For Chevrolet Suburban 2021 year

Supports For Chevrolet Tahoe 2021 year

Supports For Buick

Supports For Cadillac Escalade 2021 year

Supports For Cadillac Escalade 2021 year

Supports For GMC Yukon 2021 year

Supports For GMC Yukon XL 2021 year

Supports For Holden

Supports For DAEWOO

Supports For Alpheon

Supports For Ravon

Supports For Pontiac

Supports For Saturn

Supports For Hummer

With Diagnostics over DoIP, diagnostics introduced over UDS are used over TCP/IP and Ethernet. This enables much higher data rates than with CAN. That makes LAUNCH CRP919E save both in terms of time and expenses in the case of complex diagnostic tasks and flash applications. Compatible with BMW (F&G chassis), Volvo models (2018 later), Land Rover & Jaguar models (2017 later).

Actuate solenoids and actuators for active testing, send commands to systems/components to test their working status, without using the vehicle controls.

The advanced coding function is used to re-flash the vehicle control modules, which allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements, providing solutions for the issues of drivability, fuel efficiency, power loss, fault codes, durability of mechanical parts etc. But please note, ecu coding are NOT universal for all vehicles, please check compatibility with VIN nuMBer before purchase.

1.ABS Bleeding

When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.

2.TPMS Reset

When due to the tire pressure is too low,tire leaks,tire pressure monitoring device is replaced or installed,tire is replaced and tire pressure sensor is damaged,The tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL.

3.Oil Lamp Reset

Allows you to perform reset for a new calculation of Engine Oil life system once changed the oil.

4. Electronic Throttle Sensor Reset

To utilize the car decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state.

5.Injector Coding

After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection.

6. SAS Reset

It helps clear the faulty steering angle sensor memories to reset the steering angle and plays an important role in the steering angle sensor calibration.

7.Brake-pad Reset

To deactivating and activate the brake control systems, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement.

8.Gear Learning

Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.

9.IMMO Service

To prevent the car being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car.

10.Battery Matching

Enables you to perform resetting operation on the monitoring unit of battery,in which the original low battery fault information will be cleared.

11.DPF Regeneration

It is used to clear PM (Particulate Matter) from the DPF filter through continuous coMBustion oxidation mode. Specially works for Diesel Particulate Filter system with DPF.

12.EGR Adaption

This function is used to learn the EGR (Exhaust Gas Recirculation ) valve after it is clean or replaced.

13.Suspension Matching

When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, this function can adjust the body height sensor for level calibration.

14.NOx Sensor Reset

If the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.

15.Tyre Reset

This function is used to set the size parameters of the modified or replaced tire.

16.Windows Calibration

This feature is designed to perform door window matching to recover ECU initial memory.

17.Stop-start Reset

This function is used to open or close the automatic Start/Stop function via setting the hidden function in ECU (The precondition is the vehicle equipped with hidden function and hardware support)

18. AC Initialization
AC system relearn/initialization must be performed when the vehicle AC ECU or actuator is replaced or the ECU memory is lost.

19. AdBlue Reset

After the diesel exhaust treatment fluid (car urea) is replaced or filled up, the urea reset operation is required.

20. AFS Headlamp Reset

This function enables you to initialize the adaptive headlamp system.

21. A/F Reset

This function is applied to set or learn air/fuel rate parameters.

22. Gearbox Reset

This function enables you to complete the gearbox self-learning to improve gear shifting quality

23. Coolant Bleeding

Use this function to activate the electronic water pump before venting the cooling system.

24. Transport Reset

To lower vehicle power consumption, user may perform the following operations: limit vehicle speed, not wake up the network for door open and disable remote key, etc. In this case, deactivating the transport mode is needed to recover the vehicle being normal.

25. Seat Calibration

This function is applied to match the seats with memory function that are replaced and repaired.

26. High Voltage Battery Detection

This function is used for high voltage battery diagnosis and status information detection.

27. Sunroof Initialization

This function enables you to set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car ,etc.

28. Engine Power Balance Monitoring

This function is used to monitor crankshaft acceleration in the power stroke of each cylinder, to determine the relative power provided by each cylinder.

29. Language Change

This function is used to change system language of vehicle center console.note:you need to have language pack to do language change

30. Gas Particulate Filter (GPF) Regeneration

This function is used to perform the GPF replacement or regeneration after the fuel consumption is increased and engine output power is reduced resulting from a long time service of the GPF.

31. Intelligent Cruise Control System Reset

This function is used to matching the intelligent cruise control module after it is replaced or repaired.

(Note: Available maintenance functions vary depending on the vehicle make, year, and model.)