Autel MaxiIM IM508 Advanced IMMO & Key Programming Tool with XP200 Programmer Support 20+ Service Functions

Original Autel MaxiIM IM508 ADVANCED IMMO Diagnostic Tool & Key Programming – Perfect Replacement of IM100

Autel MaxiIM IM508 is a fast, easy-to-use, and ultraportable immobilizer and Key Programming device. It delivers exceptional service functions for the immobilizer system and offers comprehensive diagnostics across all vehicle modules for a wide range of makes and models. With advanced special functions and professional-grade performance, the IM508 is an ideal solution for workshops and technicians seeking an affordable yet powerful tool for IMMO and diagnostic services.

Autel MaxiIM IM508 Key Features

Comparison with IM608

Equipped with the XP200 Key Programmer, the Autel IM508 provides all the IMMO functions available on the IM608—except for Benz 3rd Generation IMMO, BMW CAS4 Key Learning, and VW/Audi MQB (VDD & JCI) Add Key, as well as IMMO V A4/A5/Q5 2015+ Key Learning. Despite these exceptions, IM508 delivers nearly the same capabilities at approximately one-third the price, making it a cost-effective alternative to the IM608. This professional automotive tool combines Key Programming, full-system diagnostics, and advanced service functions in one compact device.

Comprehensive IMMO & Key Chip Programming

The IM508 supports a wide range of immobilizer and key programming operations, including:

• Read PIN/CS (All Key lost)
• Key generation and learning
• Remote control learning
• Benz FEM/BDC Key Learning and ECU Adaptation
• BMW CAS3/CAS2 Key Learning
• VW/Audi/Skoda/Seat IMMO III/IV/V: Add Key and All Key lost
• IMMO ECU reset, adaptation, refresh, and coding
• Transponder read and write
• EEPROM/MCU read and write

For enhanced programming capabilities, the IM508 is compatible with the optional XP400 Key Programmer.

Most Useful Service Functions

As a professional diagnostic scanner, the IM508 includes essential maintenance services such as:

• Oil Reset
• Parking Brake Pad Reset after replacement
• Steering Angle Sensor (SAS) Calibration
• TPMS Sensor ID Relearn
• Battery Management System (BMS) support
• Active testing for component functionality verification

OE-Level All Modules Diagnosis

The Autel MaxiIM IM508 enables OE-level diagnostics on over 80 US, Asian, and European vehicle makes and models. It quickly scans all electronic control units (ECUs), retrieves diagnostic trouble codes (DTCs), displays live data, shows ECU information, and supports adaptation, coding, and module matching. To verify compatibility with your specific vehicle, contact [email protected] or use the Q/A section.

12 Months Free Software Updates

The IM508 comes with 12 months of free software updates and is backed by a 45-day money-back guarantee and a 12-month warranty from the US seller. Make a risk-free purchase today and enhance your vehicle security against theft.

Multi-Language Support

Available languages include: English, French, German, Dutch, Polish, Swedish, Korean, Japanese, Russian, Italian, and Traditional Chinese.

Autel MaxiIM IM508 Function List

• All Systems Diagnostics
• AutoVIN / AutoScan
• Read and Erase Codes
• View, Record, and Playback Live Data
• Review Freeze Frame Data
• Shop and Data Manager Applications
• Key Read / Write
• EEPROM / MCU Read / Write
• Read PIN / CS (All Key lost)
• Key Generation
• Key Learning
• Remote Learning
• Backup and Restore IMMO Data
• IMMO ECU Reset / Adaptation
• IMMO ECU Refresh / Coding
• BMW FEM / BDC Key Learning and ECU Adaptation
• VW / AUDI MQB Key Learning, 48 Transponder (96-bit) Add Key, All Key Lost, A6 All Key Lost, and more

Professional Key Programming Capabilities

The Autel IM508 is a professional-grade car diagnostic scanner designed to deliver robust immobilizer system functions, including immobilizer status checks, key and remote learning, all keys lost recovery, chip read/write, and secure key management—helping prevent vehicle theft.

Smart Mode & Expert Mode

• Smart Mode: Guides users step-by-step through each function using an intuitive smart guide interface.
• Expert Mode: Provides direct access to individual functions for experienced technicians who prefer manual control.

Commonly Used Reset Services

Oil Reset Service

Resets the engine oil life monitoring system after each oil change, allowing accurate calculation of the next required service interval based on driving conditions and climate.

EPB Service

Supports electronic parking brake maintenance tasks such as deactivating/activating the brake system, assisting with brake fluid bleeding, opening/closing brake pads, and resetting brakes after disc or pad replacement.

SAS Service

Performs Steering Angle Sensor calibration by storing the current steering wheel position as the center (straight-ahead) reference in the sensor’s EEPROM. Ensure wheels are aligned straight before calibration.

TPMS Service

Retrieves tire pressure sensor IDs from the vehicle’s ECU, performs TPMS sensor replacement procedures, and conducts sensor functionality tests.

BMS Service

Enables evaluation of battery charge state, monitors close-circuit current, registers new battery installation, and activates the vehicle's rest mode via the Battery Management System.

DPF Service

Manages DPF regeneration, component replacement teach-in, and recalibration after engine control unit replacement.

OE-Level All Systems Diagnosis

The IM508 performs factory-level diagnostics on all major vehicle systems—including ABS, SRS, Engine, Transmission, and more—and displays real-time sensor data in text or graphical format. It supports over 80 American, Asian, and European vehicle brands.

Auto Scan Technology

The built-in Auto Scan feature comprehensively scans all ECUs in the vehicle, identifies system faults, and retrieves diagnostic trouble codes (DTCs) for faster and more efficient troubleshooting.

Live Data & Freeze Frame Review

The IM508 reads and clears diagnostic codes while displaying live data from multiple sensors in real time. The Review Data function allows playback of recorded live data streams for detailed analysis.

Remote Technical Support

The Remote Desk application integrates TeamViewer Quick Support, enabling secure remote access to your MaxiIM tablet. Technicians can receive instant support from Autel’s service center, colleagues, or peers by allowing them to control the device remotely from their PC.

XP200 Key & Chip Programmer

The XP200 programmer works independently without requiring a vehicle connection. It allows direct access to key chips for reading, retrieving, and writing key information.

Autel IM508 EEPROM Read/Write Supported Types

ATMEL

AT24C01, AT24C02, AT24C04, AT24C08, AT24C16, AT24C32, AT24C64, AT24C128, AT24C256, AT24C512, AT24C1024, AT24C128_1.8, AT24C256_1.8, AT24C512_1.8, AT24C01A, AT25010, AT25020, AT25040, AT25080, AT25160, AT25320, AT25640, AT25128, AT25256, AT25512, AT25010_1.8, AT25020_1.8, AT25080_1.8, AT25320_1.8, AT25640_1.8, AT25128_1.8, AT25256_1.8, AT59C11, AT59C22, AT93C46A, AT59C13, AT93C46, AT93C46R, AT93C56, AT93C57, AT93C66, AT93C76, AT93C86

CATALYST

CAT25C01, CAT25C02, CAT25C04, CAT25C08, CAT25C16, CAT25C32, CAT25C64, CAT25C128, CAT25C256

FAIRCHILD

NM24C16U, NM24C16UT, NM24C17U, NM24C17UT, FM93CS46T

MICROCHIP

85C72, 85C82, 85C92, 25xx080, 25xx160, 25xx320, 25xx640, 25xx040_TSSOP, 25xx320_TSSOP, 25xx640_TSSOP, 93C06, 25xx040, 93C46X, 93C46A, 93C46, 93C46AX, 93C46BX_93C46CX, 93C56A, 93C56, 93C66A, 93C66, 93C76A, 93C76, 93C86A, 93C86

NXP

PCF8582C, PCF8594C, PCF8598C

NATIONAL

NM93C13, NM93C14, NM93CS06, NM93C14TM8, NM93CS46, NM93CS56, NM93CS66

OKI

MSM16911

SONY

CXK1011, CXK1012, CXK1013

Seiko

S_24S45, S_24H30, S_24H30_SOP8, S_24H45, S_24H45_SOP8, S_24S30

ST

M24C01, M24C02, M24C04, M24C08, M24C16, M24C32, M24C64, ST24x01/ST25x01, ST24x02/ST25x02, ST24x04/ST25x04, ST24x08/ST25x08, ST24x16, ST25x16, AT25040_1.8, AT25160_1.8, M95010, M95020, M95160, M95040, M95080, M35080, M95320, M95640, M95256, M95128, M95512, M93C46, M93C56, M93C66, M93C76, M93C86, M93S46, M93S56, M93S66

TOSHIBA

TC89101, TC89102, TC89121, TC89122

TMC

TMC93LC46, TMC93LC56, TMC93LC57, TMC93LC66, TMC93LC86

XICOR

X5043, X5045, X25043, X25045, X24C44

9S12 Read/Write Supported Types

FREESCALE

MC9S12DG128

How to Update Autel MaxiIM IM508?

1. Ensure the MaxiIM tablet is connected to a stable power source and Wi-Fi network.
2. Open the Update application from the Job Menu, tap an update notification, or access it via the Vehicle Menu in the Diagnostics app.
3. Select updates:
   • To update all IMMO software, go to the IMMO tab and tap "Update All".
   • To update all diagnostic software, select the Diagnose tab and tap "Update All".
   • To update specific items, tap the "Update" button next to each item.
4. Use the "Pause" button to suspend the update; tap "Continue" to resume from where it was paused.
5. Upon completion, the firmware installs automatically, replacing the previous version.

Autel MaxiIM IM508 vs. IM608 Comparison Chart

For detailed comparison, visit the official blog: Autel IM608 vs IM508 vs IM600 vs IM100

You can upgrade the IM508’s programming capabilities with the XP400 Key Programmer.

Autel MaxiIM IM508 FAQs

Question 1: Does the MaxiIM IM508 program the smart key for a 2015 Chrysler 200?

Answer 1: Yes, it can. Check the compatibility chart here: Vehicle Compatibility Checker

Question 2: Can it perform remote control learning?

Answer 2: Yes, the IM508 supports remote control learning.

Question 3: Can it read and clear ABS codes?

Answer 3: Yes, it can read and clear ABS diagnostic trouble codes.

Question 4: Will the IM508 program smart keys for a 2000 Toyota Camry, 2002 Dodge Ram, and 2007 Chevy Suburban? The link isn’t working.

Answer 4: If not all keys are lost, the IM508 can add new keys to these vehicles. Please refer to the updated compatibility resources provided by Autel.

Question 5: Can it perform Benz 3rd Generation IMMO add key?

Answer 5: No, it cannot. We recommend using the IM608 for this function.

Autel MaxiIM IM508 Specifications

• Operating System: Android™ 4.4.4
• Processor: Cortex-A9 (1.6 GHz)
• Memory: 32GB internal storage
• Display: 7-inch LCD capacitive touchscreen (1024x600 resolution)
• Connectivity: Mini USB 2.0, USB 2.0, Wi-Fi, Micro SD card (up to 32GB)
• Sensors: Ambient light sensor for automatic brightness adjustment
• Audio Output: Buzzer
• Battery: 3.7V / 5000 mAh lithium-polymer battery; charges via 5V DC power supply
• Tested Battery Life: Approximately 4.5 hours of continuous use
• Charging Input: 5V / 1.5A
• Power Consumption: 500 mA (LCD on, default brightness, Wi-Fi enabled) @3.7V
• Operating Temperature: 0 to 50°C (32 to 122°F)
• Storage Temperature: -20 to 60°C (-4 to 140°F)
• Operating Humidity: 5% – 95% non-condensing
• Net Weight: 788 g (2.42 lb)

Supported Automotive Protocols

ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, ISO11898 (High-speed, Middle-speed, Low-speed, Single-wire CAN, fault-tolerant CAN), SAE J2610, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6

Autel MaxiIM IM508 Package Contents

• MaxiIM IM508 Tablet
• XP200 Key Programmer
• AAC001–MED17 Cable
• Honda-3 Adaptor
• KIA-20 Adaptor
• KIA-10 Adaptor
• Mazda-17 Adaptor
• USB External Power Adapter
• Carrying Case
• Main Cable
• Quick Guide
• Mini USB Cable
• Carry Case