V5.017 KESS V2 Plus LED BDM Frame with Mesh and 4 Probe Pens

V5.017 KESS V2 or V7.020 KTAG Plus LED BDM Frame with Mesh and 4 Probe Pens

Top 3 reasons to get V5.017 KESS V2 Plus LED BDM Frame:
1.Can support All the functions for V5.017 KESS V2 or V7.020 KTAG ECU Programmer;
2. with LED BDM Frame, allows you much easier to do ECU Update/ECU Brush and Write/ECM Modified and programming/Probe holder/Dimsport aids.
3.Support Multi-Languages

Attention: This package is latest V5.017 KESS V2(SE137) with LED BDM Frame(SO433) or Latest V7.020 KTAG(SE135-B) With LED BDM Frame(SO433), you need to choose one of them before shipping.

Feature for V5.017 KESS V5.017 (SE137):

1. Can support car / Truck / tractor / bike! KESS V5 supports vehicle according to Motor. So V5.017 can support new vehicle!
2. Latest Firmware Version: V5.017, Latest Software version: V2.47
3. 100% no token limitation for all vehicles! So V5.017 is used for lifetime!
4.Multi-language support: English, German, Spanish, Italian, Portuguese, French.
5.OS System: Works on Win XP / Win7 32bit, Win8, etc.
6. Fully open to all protocols such as EDC17 / k-line / DSG / DQ200 DQ250 DQ500 Gearbox / ST10 ...., no gray protocols anymore!
7. Software is very easy to install, just click: Next Step, then it works fine!
8. Can have more 140 types of vehicle types or protocols than KESS V4.036
9. If you need KTAG Latest V7.020 ECU Programmer, please choose KTAG V7.020(SE135-B).

Note: Can not connect the internet!

Feature for V7.020 KTAG V7.020(SE135-B):

1.With latest Firmware version: V7.020, Software version: V2.23
2.Supported Multi-Languages: English French Portuguese Spanish Italian Deutsch
3.Support BDM Function Well, no checksum error, available Protocols BDM MOTOROLA MPC5xx
4.Support both Car, Motorcyle and Truck ECU Programming
6.Add New File type (FENDT/JCB/VALTRA TRACTOR BOSCH EDC17CV41 SISU ENGINE CAN
7. Add ECU Type: Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU,Toyota 76F, and so on, at least 100 more ECU Types added.
8. No tokens limitation


LED BDM Frame (SO433) Descriptions:

1.It is Made by Acrylic board, with Mesh and 4 Probe Pens.
2. LED works for 12V. After you connect with the probe, disconnect 12V battery for LED,it will work.The probe pin is adjustable.
3.This LED BDM FRAME is the best bracket for ECU Update/ECU Brush and Write/ECM Modified and programming/Probe holder/Dimsport aids.
4. Work on KESS,KTAG,FGTECH,BDM100,KTM100,CMD, DIMSPORT AIDS...ECM Chip Tuning Tools.
5.It is easy to use,much better than old bdm frame.

Package List:

1 x KESS V5.017 whole package( Or 1 x V7.020 KTAG whole package)
1pc x Bdm frame with LED (Made by Acrylic board)
4pc x Connect cable for Probe
4pc x Probe