CAT200 12V 3A 3 In 1 Car Battery Tester Battery Charger Fully Automatic Power off Professional Battery Detector

CAT200 Full Automatic Car Battery Charger With LCD Screen intelligent Smart 12V/3A 2-120AH Battery Charger and Tester

If you drive rarely or make many short trips,you should charge your battery once a month.

Going on a long holiday?Connect your charger to make sure your battery is kept in trim while you're away.

Cat-200 is a device that combine battery tester and battery charger,that means it's very convenient to test and charge battery by using only one device rather than buy two devices.

Complete youtube evaluation video by Russian experts:
https://www.youtube.com/watch?v=6gkxs7GS2lU&list=RDCMUCbytwbdnuUHOeLMzfXBrrNw&index=1

Technical Parameter:

Input Voltage(AC):100-240 VAC 50/60 Hz

Output :14.4/14.7V,3.0A Max

Battery Types:Wet Cell(Flooded),Gel Cell,AGM,Lithium,EFB,or any Maintenance-Free Battery

Battery Capacity Range:2-120Ah Mantains all battery sizes

Battery Voltages:12V Lead-Acid and Lithium-Ion Batteries

Charging Type:Smart 8 Steps Trickle Charge

Testing Scope:CCA 40-2000

LCD Sizs:50*30mm

Ambient Temperature:-20℃ to 50℃

Dimensions:135*85*50 mm(L*W*H)

Actual Weight:450g

Questions & Answers:

A: No, it can only be powered by the tested battery.
Q: Can it Charge the Battery?

A: Yes,it can charge 12V Lead-Acid and Lithium-Ion Batteries.
Q: Can it test the battery life?

A: Yes,it can test the State of Health,the State of Charge,the Internal Resistance and the Testing Conclusion .
Q: What is the charging current and how long will it take to fully charge?

A: The maximum charging current can reach 3.6A, and the charging time depends on the battery capacity
Q: Why is the result of the test inaccurate?

A: Maybe the parameter you set is wrong. Please input the correct data from the battery label.
Q: Why nothing is displayed?

A: Please make sure your battery voltage is higher than 8V and The positive and negative clamp are connected correctly.

Q:What is CCA?
A:CCA: Cranking Amps Standard, effective starting current value at 0'C

Features:

【3-IN-1 Battery Tester & Charger】This is a device that combines a car battery tester and a charger. Maximum charging current of 14.7V 3A, suitable for all lead-acid batteries of 12V 2-120Ah.

【Accurate Battery Tester】
It can test the health of the battery and the current power. Using smart chip, the difference of multiple measurements is less than 10CCA

【Parameter】