Autel APB112 Smart Key Simulator Main Unit and USB Cable Set

The APB112 smart key simulator is used to collect data sent from the ignition coil, helping identify ignition coil issues and decode vehicle key chip data. It can also simulate vehicle key chips, currently supporting 4D-type chips, with additional chip types to be added through future upgrades.

Note: This is a simplified package of the Autel APB112 that includes only the main unit and USB cable. It functions identically to the full retail version but does not include the original carton box or printed user guide (which can be downloaded online).

Key Features

• Smart key simulator
• Compatible with both IM608 and IM508 (works with XP200, XP400, and XP400Pro)
• 46 and 4D data collection
• 46 smart key password calculation
• 46 chip simulation
• Toyota 4D (94/D4, 98) smart key simulation
• Toyota H (88/A8, A9, 39) smart key simulation
• Collects data from the ignition coil
• Identifies ignition coil troubles
• Decodes vehicle key chip data
• Simulates vehicle key chip (e.g., 4D chip)
• Must be used with an Autel diagnostic tool
• Supports Toyota/Lexus "all keys lost" scenarios
• Chip decoding (Hyundai 46)

How to Use the Autel APB112

Important Safety and Usage Notices

• Before operating or maintaining the APB112, carefully read all instructions and pay close attention to safety warnings and precautions.
• The APB112 does not work alone—it must be used together with an Autel MaxiIM IM608 or IM508.
• Do not disconnect the USB cable during operation.

1. Connect the APB112 Smart Key Simulator to your Autel diagnostic device using the supplied USB cable.
2. Once connected, the status indicator lights solid blue, indicating proper power supply and default operational state. The device then automatically communicates with the diagnostic tool.
3. The APB112 application is automatically updated on the Autel diagnostic device based on the selected vehicle system function.
4. Place the Smart Key Simulator near the ignition coil to collect data for chip decoding. After successful decoding, the original car chip data can be copied.
5. The emulator can generate various types of key chips, with support for additional types added through future upgrades.

AUTEL APB112 Smart Key Simulator Overview

Component Details

1. Status Indicator – Shows Current Device Status

1. Solid Blue: Power supply is working properly; device is in default state.
2. Flashing Green: Data interaction in progress.
3. Flashing Red: Firmware upgrade in progress.
4. Solid Red: Booting up.

2. USB Interface

Provides both power and data communication.

Package Includes

• 1 × AUTEL APB112 Main Unit
• 1 × USB Cable