1. Car ignition difficult
2. Engine Fault Light Blinker
3. Vehicle Liquid Leakage
4. Exhaust emission exceed
5. Speeding up powerless
6. Large fuel consumption
YA100 is a new generation OBD2/EOBD diagnostic tool that supports all 10 OBD II test modes for all OBD II compatible vehicles, enabling individual car owners and professional technicians to accurately diagnose the most subtle problems of the car.
This ergonomic scanning tool is very easy to use and we believe it will give you a very pleasant experience.
English, Russian, German, Spanish, French, Italian, Japanese, Polish, Portuguese, Simplified Chinese, Traditional Chinese
1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4) I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
9. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability
The oxygen sensor monitor allows the PCM to verify that the O2 sensors are properly calibrated and functioning without noticeable deterioration under normal engine operating conditions. KINGBOLEN YA100 obd2 scanner helps you get fully prepared for passing the smog check.
YA100 obd2 scanner Built-in Code Definition.Enter the fault codes you got and enter them to get the code definitions and locate the bad parts of your vehicle. No need to search online for what's the codes meaning. You can easier read what's the meaning of the fault codes that was detected.
Plug & Update Free, USB interface is quickly upgraded, KINGBOLEN Obd2 Scanner no need to install drivers. The tool software can be updated via USB, so you always have the latest car model data.
"Tech Support" You also can get Help lifetime free from official website, use the feedback function to improve this code reader with enginner.
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2 (5 baud init,10.4Kbaud)
4. ISO14230-4 KWP (5 baud init,10.4 Kbaud)
5. ISO14230-4 KWP (fast init,10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID,500 Kbaud)
7. ISO15765-4 CAN (29bit ID,500 Kbaud)
8. ISO15765-4 CAN (11bit ID,250 Kbaud)
9. ISO15765-4 CAN (29bit ID,250 Kbaud)
Compatible with Standard OBD2 Cars from 1996 to Now:
For Chrysler, for Ford, for GM, for Jeep...
Compatible with Standard OBD2 Cars from 2003 to Now:
For Alfa Romeo, for SAAB, for Acura, for Opel, for Audi, for Seat, for Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for Vauxhall, for Volvo, for VW, for Ford, for Jaguar...
for Citroen, for Fiat, for Renault, for Peugeot
Not Support for Renault Clio 2/Megane/Dacia Logan...
Compatible with Standard OBD2 Cars from 2007 to Now:
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai, for Dacia, for Lexus, for Mazda, for Nissan, for Subaru, for Suzuki, for Toyota....
Compatible with Standard OBD2 Cars from 2009 to Now:
for BYD, for Chery, for Geely, for Great Wall, for Karry...
Not support Russian Cars VAZ, UAZ, LADA ;
Not works with trucks For Ssangyong Actyon, from 2009 to 2017 years. For Ssangyong Korando, 2.0 TD Diesel, from 2013 to 2017 years.
For Ssangyong Kyron, 2.0 Diesel, from 2010 to 2017 years.
For Ssangyong Rexton, 2011 to 2017 years,
Not support Opel Corsa c 2004 1.3 CDTI
Not support VW golf 4 2002
Not support Citroen C4/C5 .
Not support Chevrolet cars ,
Not support Renault Logon/ megane
Not support skoda fabia .Skoda OCTAVIA .
Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol. Especially Japanese and Korean car brand. And this device only have OBD2 Functions, don't have Special Functions, Like ABS Reset, Airbag Reset...
1pc * YA100 Code Reader
1pc * English User Manual
1pc * Carton Box
