Original Launch X431 V+5.0 PRO3 Full System Diagnostic Tool with Launch GIII X-PROG3 Immobilizer Programmer

Launch X431 V+5.0 PRO3 Full System Diagnostic Tool with GIII X-PROG3 Immobilizer Programmer

Launch X431 V+ is a typical diagnostic device contributed by Launch to diagnostic industry concerning Internet application. You can use X431 V+ to diagnose full car model and full system fault through Bluetoooth. X-PROG 3 is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 V+, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.

Highlights:

1. Global Version, No IP Limitation
2. Package Contains Full Set Launch X431 V+ and Launch GIII X-PROG3
3. Vehicle Coverage: Supports about 80 car brands from USA, European, Asian and so on.
4. Supports More Advanced Functions, including Actuation Test and Guiding Functions (compatible with VW, AUDI, SKODA, SEAT).
5. Support Multi-Language: English, Italian, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Dutch, Danish, Korean, Finnish, Swedish, etc
6. Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
7. Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
8. Enables Reading/ Writing EEPROM, On-Board MCU and BMW CAS4+/ FEM Chips, Mercedes-BENZ Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.
9. Free Update Online for 2 Years



New Added OE-LEVEL Advanced Functions of LAUNCH X431 V+

Guided Functions: Compatible with Volkswagen / Audi / Skoda / Seat etc.
Component Matching: Compatible with Volkswagen / Skoda / Seat / BMW / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / Kia / Subaru etc.
Online Coding: Compatible with Volkswagen / Audi / BENZ / BMW / Seat / Porsche etc.
Online Account Login Service: Compatible with Volkswagen / Audi / Skoda / Seat etc.
Online Calibration: Compatible with Volkswagen / Audi / Skoda / Seat etc.
Power Balance: Compatible with Chrysler / GM / Ford etc.
Programmable Module Installation: Compatible with Ford / Mazda etc.
Flash Hidden Functions: Compatible with BMW / Porsche / Toyota / Subaru etc.√ Actuator Test : Injector Test ;Turn Off ACC Lane Keeping Assist



* For BENZ
Optimized ADAS (Advanced Driving Assistance System) function for SSLink products.
Optimized the function of Query VIN for police equipment.
Updated DPF function(Regeneration of the diesel particulate filter while driving) of diesel engine (CRR1, CRD2, CR43, CR6, CR6EU5, CR6BIN5EU6) under 117, 212, 207, 204 and more chassis.

* For LANDROVER
Added the special function of Camera Calibration for Land Rover models in the year range of 2010 to 2014
Added special functions related with ADAS (Advanced Driving Assistance System) for all models of Jaguar and Land Rover in the year range of 2017 to 2020.

* For SPRINTER
Added actuation test and special functions for the headlight range regulation module, reversing camera, and 360 degree panoramic camera under chassis 470/471.
Added the data stream and actuation test functions for the systems such as engine, gearbox, gearshift module, fuel pump, drive system, A/C, signal acquisition and actuation control module, and FL door under chassis 907/910.

What Can X431 GIII X-Prog 3 Do For You?

1. Integrated the functions of key matching/ copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the fourth-generation of VW/ AUDI engine;
5. Supports ECU replacement for the fifth-generation of VW/ AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
12. Supports VW/ AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
13. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
14. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
15. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
16. Works with reprogramming device to backup/ restore programming data (For Bosch/ Siemens engine ECU).



Package List:

1set x X431 V+5.0 PRO3
1set x Launch X-PROG3