New C5 OBD2+GPS Head Up Display Head Up Display Speedometer HUD Car Windscreen Speed Projector KMH/KPM Compatiable With all Cars

Noghosting,Stereo imaging

Built-in display film, no need to paste film, no ghosting, use translucent emission lens to suspend the information three-dimensional display in the airWide viewing angle-HD

No matter the placement, it is clear and natural, in line with the driving sight

Quality assurance craftsman spiritHUD display function

speed. Clock, RPM, water temperature, voltage, fuel consumption.Altitude, mileage, driving time. Power test, number of satellitesItalian designer precision carving

Master-level design, unique ingenuity, every inch is carefully manufactured, Using seamless fastening technology to make the shape of C5 more perfectThree-dimensional button design Simple and innovative experienceAdjustable angle design

Super wide screen, adjustable to your comfortable driving angleProduct SizeMufti-function display

A variety of interfaces can be switched at will to meet different needs and make driving more convenientDual mode dual system OBD + GPS

Dual mode, OBD data + GPS data can be displayed at the same time, GPS data is suitable for all modelsGPS+Beidou dual positioning

Use 10 Hz high refresh GPS + Beidou dual-mode chip The refresh rate is 10 frames per second, and the vehicle speedis refreshed quickly without delayAccuratespeed display

Introduce the core algorithm of Taiwan technology and add the speed calibration function, which can be adjusted to beconsistent with the car dashboard display6 humanized alarm settings

Set different parameter over-limit alarms, icon flashing alarms, sound alarms to improve driving safetyClear fault code

One key to clear the fault code, solve the problem in time, without additional time and cost3 fuel consumption automatic switchingEjection start sprint test

Hundred-kilometer acceleration refers to O to 100km/h acceleration time, which is the most intuitive manifestation of automobile powerAutomatic sensitivity adjustment

Equipped with photosensitive elements, adjust the brightness of the display according to the intensity of the light, all-weather, all-environment, clear display, no glare when drivingAutomatic switch

With the car start and stop, automatic switch and shutdownSupport two power supply modes

1.OBD line power supply

2.Cigarette lighter cord power supplyProduct accessories

1.C5-head-up display x1

2.Cigarette lighter cord x1

3.OBD line x1
4.cleaning cloth x1
5.Manual x1

OBD2 FAQ:

1.No function is displayed,no power

Check whether the OBD cableis tight connection,pull down repeatedly to confirm,please try it on another car if still not workable,analysis if it is an error from OBD diagnostic interface,if yes,please repair it and connect the device again.

2.Only the car voltage displays and be automatic power off after 30 second

(1) This product is only available for OBDII and EOBD cars when it is in OBD2 mode

(2) This product OBD2 mode does not support OBD I and JOBD

(3) OBD2 is a car protocol(U.S.A Cars:2003 Other regions:2007)

(4) Switch to the GPS system using the USB cable to display, within 5 seconds of power Pull right the button to select the GPS system.

3.The vehicle speed on HUD is not as same as speedometer’s

(1) Please check that the unit is correct KM/mile MPH, (speed unit switch please refer to the settings)

(2) Vertical long press into the system settings, pull right the button to select the speed adjustment menu,and make a fine-tuning (e.g. meter displays 100 Km/h,device shows 105Km/h,use default value 107-5=102 ).

4. There is an error on fuel consumption

(1) Checking your car displacement and make sure that the engine displacement of the device is as same as your car’s(e.g. car is 2.0L,please set parameter value to 2.0L)

(2) if the displacement is the same,you can also do a fine-tuning settings(e.g. equipment fuel is higher than 0.2L,please set the parameter to 98%) Recommended: fine-tuning is optional since it is a real data from car computer

5.The device cannot auto power off

Adjust the sleep voltage to 13.2V or 13.6V, then HUD will power off in 3 minutes.

6.Auto start- stop cars

Adjust the shutdown voltage setting in the system settings to the COM mode

7. Automatic start-up will auto off when step the brake and same situation on Hybrid car in the traffic.

(1) Setting to COM mode(in the menu of shutdown voltage)

(2) Setting shutdown delay to 300 seconds,so that it can turn off after 5 minutes

(3) Please switch to the GPS system(Dial up the scroll wheel within 5s)

8.Wrong operation lead to crashes

(1)Does the OBD2 interface use other OBD equipment (position, tire pressure monitoring, drop lock, lift window folding, ELM27)

(2)Modified and retrofitted (central control navigation electronic throttle accelerator fixed speed cruise brushed computer system

(3)One-key start, keyless entry, remote start) will cause crashes, unplug other OBD devices and use the product directly, to restore factory settings (see the setting table for details)

(4)Press and hold the scroll wheel to enter the setup menu, right-click the scroll wheel to switch to system settings, press the scroll wheel vertically to enter the system settings, right-click the scroll wheel to switch to factory settings, and press the scroll wheel vertically to confirm.

(5)If you haven't solved it, please switch to GPS system and use USB cable for display. Turn on the power and turn the dial for 5 seconds to select the GPS system.

GPS FAQ;

1.The screen without any display,and no power

Start the car engine;check if the cable line is tight;or connect the USB to the computer to check

2.Without car Speed

After HUD power-on, the GPS will start to find the satellite. Please drive the car to the road. It will work once gets more than 5 satellite signals.

3. Cannot be turned on automatically or repeatedly extinguished during driving

Please use the USB cable to insert the cigarette lighter

If you use the OBD cable, change the sleep voltage to 13.0V or 12.8V

If use the USB cable, make the sleep voltage off.

4.Inaccurate time

Enter the setting items: system time adjustment, turn the dial to the right to adjust the time zone time, after adjusting, press the dial vertically shortly for 2 seconds to save and exit

5.Speed is not correct

(1) If the unit is correct,km KM/mile MPH, (speed unit switch reference settings item)

(2) The car factory had increased speed(5-7%)than real for drivers’ safety,satellite data is strictly follow the international standards

(3) Fine-tuning the vehicle speed, e.g. meter display 100 Km/h, machine display 105Km/h,default value 107-5=102

6.Driving direction display error

After the vehicle speed exceeds 5KM/H, the direction can be displayed normally.

7.Speed is still on display after the car stops

Satellite drift will be caused in underground parking,tunnel,overpass or blockers,please drive your car on open road,then this situation can be solved after the satellite numbers >5

8.HUD cannot be automatically shut down after car stopped

(1) HUD can be shut down in 3 minutes(in OBD mode)

(2) If not in 5 minutes,set item shutdown voltage to 13.5V or use the USB cable