Deep Cleaning Facial Cleaner Beauty Face Steaming Device Facial Steamer Machine Facial Thermal Sprayer Steamers Skin Care Tool
Features：
Steam care for different skin types:
Oily skin:The steam time is about 10-15 minutes;
If using aromatherapy box, citrus and lemon essential oil is recommended;
Wash face with water and soft cleanser; then apply frosted milk or facial mask, then use toner and lotion.
Dry skin:The steam time is about 8-12 minutes;If using aromatherapy box, it is recommended to use rose essential oil;Wash your face with water; then apply a facial mask or emulsion and cream.Tip: do not use steam to treat the face, but apply the moisturizing mask to the face steam.
Sensitive skin:Steam time up to 10 minutes;If using aromatherapy box, it is recommended to use jasmine essential oil;Wash your face with water; then apply a facial mask or emulsion and cream.
Skin prone to blackhead and acne:The steam time is about 5-8 minutes
If using aromatherapy box, it is recommended to use menthol lavender essential oil;Wipe the sweat and excess grease with the unloading cotton; then carefully squeeze the blackhead acne with your fingers or use a special acne remover.
Hint: you can use two fingers to hold two cotton pieces and gently squeeze blackheads, then clean the skin with a soft detergent, and finally use toner and lotion.
Descriptions:
Material: ABS
Rated power: 300W
Optional plug: US plug/EU plug
Steam volume: 6.5g/min
Style: A501, A506
A501:
Color: blue, pink, purple
Product size: 23 * 20 * 19cm
A506:
Color: green, pink
Product size: 27 * 21 * 15cm (after assembly)
Packing list:
1 * Host (including line)
1 * Face mask
1 * Measuring cup
1 * Nasal aspirator
1 * Aromatherapy box
1 * Instruction manual
Use Instructions:
1. Pour the purified water into the aluminum pot of the host machine with a water cup, and the maximum water level does not exceed the max warning line in the aluminum pot. The water level is about 80ml and can be used for about 25 minutes continuously;
2. Align the clip head at the bottom of the mask with the slot on the base, and then rotate it clockwise to fix it. If a nasal aspirator is used, rotate and fix the chuck at the slot;
3. Open the aromatherapy box, put the solid spices or Chinese herbal medicine (purchased separately) into it, and then close the aromatherapy box and put it in the center of the noodle dish. If you don't use aromatherapy, you can skip this step;
4. Turn on the power supply, press on / off key to start heating (heating key sets the maximum water temperature, CO lock key sets the use time). After about 3 minutes, it can be used after slight steam comes out (rotate the steam baffle to adjust the outlet volume);
5. Sit in front of the product and lean forward slightly to make the face close to the face mask. Adjust the distance between the face and the mask according to the degree of warmth on the face. When using the nose steamer, put the nose bridge close to the top of the steamer;
6. Press the on / off key again to stop heating, and then cut off the power supply. After about 10 minutes, remove the face mask or nasal aspirator, and finally pour out the remaining water in the aluminum pot (this product adopts anti dry burning system, which automatically cuts off power when there is no water).
Attention to use:
1. Please use distilled water or purified water
2. Do not directly put the heating plate under the tap to connect water, so as to avoid water overflowing into the body and causing short circuit of current;
3. If aromatherapy is not needed, face mask or nasal aspirator can be installed directly;
4. Wash the face after washing the face, then apply the moisturizing mask or your favorite cleanser or frosted milk.
5. The face steamer should not be used for more than 20 minutes each time and no more than three times a week
6. Please keep this product away from children.
![[Full Version] V2022.12.1 KT200 ECU Programmer Master Version Support OBD BOOT BDM JTAG & ECU Maintenance/ DTC Code Removal With Free Damaos](/upload/pro/kt200-ecu-programmer-master-full-version-200.jpg)
![[Basic Auto Version] KT200 ECU Programmer Master Version Support ECU Maintenance Chip Tuning DTC Code Removal OBD/BOOT/BDM/JTAG](/upload/pro/kt200-ecu-programmer-auto-version-200.jpg)
