VIDENT iEasy320 OBDII/EOBD+CAN Code Reader

VIDENT iEasy320 Display: Enhanced OBDII/EOBD+CAN Code Reader

VIDENT iEasy320 is a portable CAN OBDII/EOBD code reader designed for professionals and DIY enthusiasts. Building upon the functionalities of the iEasy300, this advanced scanner adds oxygen monitor testing, on-board monitor testing, and component testing capabilities. It is compatible with most 2004 and newer OBDII and CAN-compliant vehicles, including cars, light-duty trucks, SUVs, minivans, and hybrids sold worldwide.

Key Features of VIDENT iEasy320

• Protocol Support: J1850-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN
• Free Lifetime Updates: Includes lifetime software and firmware updates with a unique shortcut menu for easy access to update mode
• Multi-Language Interface: Supports English, French, German, Russian, Spanish, Italian, Portuguese, Hungarian, and Swedish

Note: Polish and Dutch (Netherland) languages are not supported. Upon delivery, the device includes five default languages: English, German, French, Spanish, and Italian. Additional languages can be added via the update tool or by contacting customer support.

VIDENT iEasy320 Scanner Features

1. Supports all 10 OBDII test modes
2. Red-Yellow-Green LEDs and built-in speaker indicate emissions monitor status
3. Helps detect intermittent issues or verify repairs during a drive cycle
4. I/M readiness hotkeys enable immediate use out of the box
5. Quick display of all test statuses on a single screen
6. Read and clear stored and pending diagnostic trouble codes (DTCs); turn off Check Engine Light (MIL) and reset monitors
7. View on-screen fault code definitions (generic, manufacturer-specific, pending, and permanent where available)—thousands of definitions stored in the tool’s software
8. Access fault code definitions from the on-board database
9. Read freeze-frame data, including fuel trim, engine coolant temperature, and other engine conditions at the time the Malfunction Indicator Lamp (MIL) was activated
10. Read, record, graph, and playback real-time live data streams from engine sensors—ideal for diagnosing intermittent faults
11. Graph live engine data directly on-screen
12. View oxygen sensor test results (vehicle-dependent)
13. Perform and view on-board monitor tests and component tests
14. Retrieve protocol, VIN, Cal ID, and CVN identifiers from the ECU (vehicle-dependent)
15. Enhanced Mode 6 functions: Non-continuously Monitored Systems test results
16. Automatic VIN acquisition and decoding for easier access to manufacturer-specific codes and enhanced Mode 6 data
17. Test and display battery voltage
18. Support up to 4 simultaneous graphic comparisons of data streams

iEasy320 Update Instructions

1. Download the Ieasy update tool and update files from the official website and save them to your computer.
2. Unzip the update tool file and follow the on-screen instructions to install the application and driver.
3. Double-click the Ieasy desktop icon to launch the application.

4. Click "Setting" and select the desired language for update.
5. Press and hold the HELP key; while holding it, connect the USB cable.
6. When the tool enters Update Mode, the application will automatically detect the device.
7. Select the file(s) to update and proceed.

Vehicle Coverage for VIDENT iEasy320

All supported vehicles must comply with standard OBDII protocols and have a 16-pin diagnostic port.

American (USA) Vehicles

Standard OBD2 vehicles from 1996 to present:
Chrysler, Ford, GM, Jeep

European Vehicles

Standard OBD2 vehicles from 2003 to present:
Alfa Romeo, Acura, Audi, Bentley, BMW, Citroen, Daewoo, Daihatsu, Fiat, Ford, Jaguar, Land Rover, Opel, Peugeot, SAAB, Seat, Skoda, Vauxhall, Volvo, VW

Japanese Vehicles

Standard OBD2 vehicles from 2007 to present:
Honda, Hyundai, Isuzu, KIA, Lexus, Mazda, Mitsubishi, Nissan, Subaru, Suzuki, Toyota, Dacia

Chinese Vehicles

Standard OBD2 vehicles from 2011 to present

Important Notes:
While compatible with most vehicles, regional variations in OBD2 protocol adoption and special vehicle designs may affect compatibility—particularly with certain Japanese and Korean models.

Warning:
Does not support Russian vehicles manufactured before 2012 (including VAZ, UAZ, LADA). Not suitable for trucks. For Renault and SsangYong vehicles, please contact support before purchase.

Please provide vehicle details in the following format when contacting support: [Make], [Year], [Engine Size], [Fuel Type]
Example: Toyota, 2005, 2.0cc, Diesel

VIDENT iEasy320 Device Overview

• A. OBD II Cable: Connects to the vehicle's DLC for communication
• B. LCD Display: Shows menus, test results, and operation tips
• C. Green LED: Indicates normal engine system operation (all monitors active, no DTCs detected)
• D. Yellow LED: Signals possible issues—pending DTCs or incomplete emission monitor tests
• E. Red LED: Indicates system problems; MIL (Check Engine Light) is illuminated on the dashboard
• F. UP Key: Quick access to Read Codes function; moves selection up; changes character value when looking up DTCs
• G. DOWN Key: Quick access to Clear Codes function; moves selection down; changes character value when looking up DTCs
• H. LEFT SCROLL Key: Moves to previous character when searching DTCs; navigates between screens and codes; selects PIDs in custom list; views PID graphs
• I. RIGHT SCROLL Key: Moves to next character when searching DTCs; navigates between screens and codes; cancels PID selections in custom list
• J. One-Click I/M Readiness Key: Instantly checks emissions readiness and drive cycle status
• K. ESC Key: Cancels actions and returns to the previous screen
• L. OK Key: Confirms selections and proceeds to the next level
• M. HELP Key: Accesses help functions; long-press to enter update mode
• N. USB Port: Connects the code reader to a PC or laptop for updates

Specifications

• Display: 2.8” LCD color screen
• Operating Temperature: 0 to 60°C (32 to 140°F)
• Storage Temperature: -20 to 70°C (-4 to 158°F)
• Power Supply: 8 to 18 V via vehicle connection

Included Accessories

• 1 x VIDENT iEasy320 OBDII/EOBD Code Reader
• 1 x User Manual
• 1 x USB PC Cable (for software updates)