Digital LCD PH Meter Pen of Tester Accuracy 0.01 Aquarium Pool Water Wine Urine Automatic Calibration
Digital PH Meter Water Tester
It's not only ideal for household or laboratory use, also suitable for testing pH balance of drinking water, pool, aquarium, food Project, RO system, Spa, or hydroponics.
Specifications:
► Measuring range: 0.00-14.00 pH
► Resolution: 0.01 pH
► Accuracy: 0.01 pH
► Batteries: 2X 1.5V LR44 (not included)
► Automatic temperature compensation: 0-50Centigrade(32-122It)
► Dimensions: 15x2.5x1.3cm/6x1.1x0.5 inch
► Net Weight: 52g/1.83 oz
Warm tips
It STEP 1: Turn open pH meter, Clean the electrode in distill water
It STEP 2: Immerse the electrode in pH 6.86 standard buffer solution
It STEP 3: Press the "CAL" button. Wait until the display digital is 6.86pH and steady
It STEP 4: Clean the electrode in distill water and dry it, immerse the electrode in Ph 4.00 standard buffer solution
It STEP 5: Press the "CAL" button. Wait until the display digital is 4.00pH. Then complete pH 4.00 calibration
It STEP 6: Clean electrode and dry it, put the meter into PH 9.18 standard buffer solution. Check if reading is correct between 9.17-9.19pH
Package Includes:
► 1 x PH Meter
► 2 x Calibration packets
► 1 x User's manual
Note:
It Clean the electrode with distilled water every time before and after use
It Be careful with the glass probe since it may be a little fragile when you use.
It Remember to gently wipe it with a clean, soft cloth when you're done before capping it again.
It Open the battery case or replace battery, then need to recalibrate the meter
Tags: Digital LCD PH Meter
![[Basic Auto Version] KT200 ECU Programmer Master Version Support ECU Maintenance Chip Tuning DTC Code Removal OBD/BOOT/BDM/JTAG](/upload/pro/kt200-ecu-programmer-auto-version-200.jpg)
