Charger output side and input side
• Microprocessor Control (CPU).
• 7-STAGE AUTOMATIC CHARGING:
• This is a fully automatic battery charger with 7 charge stages.
• Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.
• 7-stage chargers are suitable for most battery types including Calcium, Gel, Lithium, LiFePo4 and AGM, Wet batteries. They may also help restore drained and sulphated batteries.
• Types of batteries: Most types of lead acid batteries including Calcium, GEL and AGM, Wet,EFB, Lithium, LiFePo4
• Switchmode technology: Yes
• Polarity protection: Yes
• Output short protection: Yes
• Non battery link protection: Yes
• Over voltage protection: Yes
• Over temperature protection: Yes
• Cooling: Fan
• Input voltage: 100-240V AC, 50-60Hz
• Rated output: 12V 6A 24V 3A
• Minimum start voltage: 7.0V
• Battery range: 6Ah-120Ah
• Thermal protect: 65'C+/-5'C
• Efficiency: App. 85%.
• Compliant standards: CB,CE, IEC60335, EN61000, EN55014
• Dimension (L×W×H): 160×100×62mm
• Weight: 470g
• Weight: 470g
LCD Display: Charge Voltage
LCD Display: Charge Current
LCD Display: Inside Temperature (allowed tolerance)
Reverse connection protection. Display: ERO
Output short-circuit protection. Display: ERO
Charging for 12V Motorcycle battery
Charging for 24V battery
Charging for 12.6V Lithium Battery
Charging for car battery
Repair Mode (Time: 16 hours)
An advanced battery recovery mode for repairing and storing, old, idle, damaged, stratified or sulfated.
Desulphation stage (only for car mode), LCD display: dES
The Desulphation stage may break down sulphation that occurs in batteries that have been left flat for extended periods of time, returning them back to full charge. sulphation occurs when lead-sulphate hardens and clogs up the battery cells.
AC cable length: 90cm, DC cable length: 60cm.
1 Set = 1pc Charger + 1pc Manual + 1pc Color Box
