Description:
• Microprocessor Control (CPU).
• Microprocessor Control (CPU).
• 7-STAGE AUTOMATIC CHARGING:
• This is a fully automatic battery charger with 7 charge stages.
• Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.
• 7-stage chargers are suitable for most battery types including Calcium, Gel AGM, LiFePo4, Wet, lead Acid batteries. They may also help restore drained and sulphated batteries.
• Types of batteries: Most types of lead acid batteries including Calcium, Gel AGM, LiFePo4, Wet, lead Acid, etc.
Feature:
Feature:
• Switchmode technology: Yes
• Polarity protection: Yes
• Output short protection: Yes
• Non battery link protection: Yes
• Over voltage protection: Yes
• Over temperature protection: Yes
• Cooling: Fan
• Input voltage: 100-240V AC, 50-60Hz
• Rated output: 12V 12A , 24V 6A
• Minimum start voltage: 8.0V
• Battery range: 6-200Ah
• Thermal protect: 65'C+/-5'C
• Efficiency: App. 85%.
• Compliant standards: CE, IEC60335, EN61000, EN55014
• Dimension (L×W×H): 170×100×65mm
• Weight: 720g
• Weight: 720g
Package includes:
1 Set = 1pc Charger + 1pc Manual + 1pc Box
Charger output side and input side
LCD Display: Charge Voltage, Charge Current, Inside Temperature
Reverse connection protection. Display: ERO
Output short-circuit protection. Display: ERO
Charging for 12V Motorcycle battery
Charging for 24V battery
Charging for car battery
Repair Mode (Time: 16hours)
An advanced battery recovery mode for repairing and storing, old, idle, damaged, stratified or sulfated.
AC cable length: 150cm, DC cable length: 95cm.
![[Full Version] V2022.12.1 KT200 ECU Programmer Master Version Support OBD BOOT BDM JTAG & ECU Maintenance/ DTC Code Removal With Free Damaos](/upload/pro/kt200-ecu-programmer-master-full-version-200.jpg)
