Description:
TOPDON 1200 is a smart Automatic Car Battery Charger for 6V/12V lead-acid and 12V lithium-acid batteries (Lithium Battery Charger ) up to 80 amp-hours, with twice the charging speed,5 charging steps, 5 charging modes,light weight, portability, ease of use, compact design and other extraordinary features,provide highly safe and reliable solution for charging,repairing,maintaining various batteries.
Specification:
-
Input Voltage AC: 100-240VAC, 50-60Hz
-
Working Voltage AC: 100-240VAC, 50-60Hz
-
Efficiency: 85% Approx.
-
Power: 25W Max
-
Charging Voltage: Various
-
Charging Current: 1.2A(12V);1.2A(6V)
-
Low-Voltage Detection: 1V(12V),1V(6V)
-
Back Current Drain: < 5mA
-
Working Temp.: 14°F to 104°F (-10° to 40°C)
-
Storage Temp.: 0° to 130°F (-17°C to 54°C)
-
Charger Type: 10 Step, Smart Charger
-
Type of Batteries: 6V & 12V
-
Battery Chemistries: Wet, Gel, MF, CA, EFB, AGM & LIB
-
Battery Capacity: 10ah-80ah (6V&12V);Maintains All Sizes
-
Housing Protection: IP65
-
Cooling: Natural Convection
-
Dimensions:172*71.7*39.6mm(6.77*2.82*1.56 inches)
-
Weight:465g(1.03 lb)
PACKAGE LISTS:
1*TOPDON TORNADO1200
1*Cable Clamp
1*AC Cable
1*User Manual
This Automatic car battery charger has 5 manually selected charging modes for 6 and 12v batteries,to provide the best possible protection and maintenance, no matter the temperature
Using a unique charge algorithm,the TOPDON T1200 smarter battery charger goes through revolutionary 5 steps to constantly read and communicate with the battery, charging only to its direct needs,and therefore avoiding any possibility of incorrect charging
1.Battery Analysis & Diagnosis-Check the battery’s initial condition, including voltage, state-of-charge (SOC), and health, to determine if the battery is stable before charging.
2.Battery Desulphation-Use voltage or high-frequency pulses to break down the sulfates that have built up over time in your aging battery, to extend battery life, and optimize battery performance.
3.Battery Bulk Charge - Begin the Bulk charging process based on the condition of the battery, and return 80% of the battery’s capacity.
4.Absorption Mode - Bring the charge level to 90% by delivering small amounts of current to provide a safe, efficient charge. This limits battery gassing and is essential to prolonging battery life.
5.Battery Float Charge - Maintain the battery fully charged, without boiling out electrolyte or overcharging, to improve the battery life
![[Full Version] V2022.12.1 KT200 ECU Programmer Master Version Support OBD BOOT BDM JTAG & ECU Maintenance/ DTC Code Removal With Free Damaos](/upload/pro/kt200-ecu-programmer-master-full-version-200.jpg)
