New S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog
S-100 Ultra-high Speed Stand-alone Universal Device Programmer, compatible with WINDOWS XP, Vista and Win7, support More than 300 IC manufacturer, more than 80000 pcs devices.
UKOBD2 Provide top quality New S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog, if you need New S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog, or have any questions about New S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of New S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog
S-100 Ultra-high Speed Stand-alone Universal Device Programmer
Features and Functions:
Only IC manufacturer approved programming algorithms are used for high reliability. (+5%~-5%) and (10%~-10%) Vcc verification enhances programming reliability.
Built with 144 universal pin-drivers. Universal adaptors are available for varies packages up to 144 pins. New device support will be easier.
Extremely fast speed. 64 Mb NOR FLASH memory in 12 seconds and 1Gb NAND in 110 seconds.
Over-current and over-voltage protection for safety of the chip and programmer hardware.
The programmer is controlled by a PC via USB2.0 (high speed) to program a chip.
ISP/ICP programming capability available via ISP/ICP adaptor.
Support devices with Vcc Voltages as low as 1.2v
WINDOWS XP/Vista/Win7 compatibility
Specifications:
Supported devices: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND)n, BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU. .
Packages supported: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, ...
Dimension: W x D x H 134mm x 188mm x 65mm
Operation temperature: 0 ~ 40℃ (32 ~ 105℉)
PC interface: USB2.0
Weight : 1.5kg
power
Power source: 100~240 V AC 50~60 Hz
Power consumption: ~ 0.5 A
Go to Buy: New S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog