Menu

SmartPRO 5000U-PLUS Universal USB Programmer Lifetime Free Update Perfect for NXP NCF29XX and PCF79XX Chips

SmartPRO 5000U-PLUS programmer is High-speed FPGA driven hardware for ultra-fast programming, it is design for versatile multi-applications, you have freedom to choose the optimum mode for your programming demands.

UKOBD2 Provide top quality SmartPRO 5000U-PLUS Universal USB Programmer Lifetime Free Update Perfect for NXP NCF29XX and PCF79XX Chips, if you need SmartPRO 5000U-PLUS Universal USB Programmer Lifetime Free Update Perfect for NXP NCF29XX and PCF79XX Chips, or have any questions about SmartPRO 5000U-PLUS Universal USB Programmer Lifetime Free Update Perfect for NXP NCF29XX and PCF79XX Chips, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of SmartPRO 5000U-PLUS Universal USB Programmer Lifetime Free Update Perfect for NXP NCF29XX and PCF79XX Chips

SmartPRO 5000U-PLUS 5000u Plus Universal USB Programmer Support PCF79XX NXP NCF29XX Serial Chips

SmartPRO 5000U-Plus support unlock and programming PCF79XX NXP NCF29XX Serial Chips, how to programming PCF79XX chips.

Top 3 Reasons To Get SmartPRO 5000U-PLUS Programmer
1. Patented I / O port drive technology, eliminate IC programming burning
Due to universal programmers are requires compatible chips, the requirements for the programming I / O port has been raised to a high level.Brand-new I / O port drive technology enables each I / O port of the universal programmer to pass high-speed signals, suppress overshoot brought by the high-speed signal, protect over-current, provide adequate and sustained output current, bear bus collision and has the ability of quickly recovering from conflict status.
2. ICP online programming, makes it easier to use and more flexible
Separate ICP download line interface is able to program chips on the circuit board online. While the offline programming mode ICP, without connecting to a computer, users only need to get the data stored in the built-in DOM. With few ICP scattered lines, it is potable for the spot debugging or a program upgrade.
3. Massive IC support, provides timely timing upgrade
The SmartPRO 5000U-PLUS programmer is now compatible with various types of MCU / Flash / CPLD / FPGA chips, etc relies on good relationships with the major manufacturers. It also provides a variety of new chips programming ability accurately and timely which will satisfy our customers' needs to greatest extent.

SmartPro 5000U-Plus PCF79XX Chips Support List:

PCF7922@ICPLine
PCF7922@TSSOP20
PCF7926@ICPLine
PCF7926@TSSOP20
PCF7945@ICPLine
PCF7945@TSSOP28
PCF7945@TSSOP28(New)
PCF7953@ICPLine
PCF7953@TSSOP28
PCF7953@TSSOP28I(New)
PCF7961@ICPLine
PCF7961@TSSOP20

SmartPro 5000U-Plus NCF29XX Chips Support List:

SmartPRO 5000U-PLUS Specification:
Type SmartPRO 5000U-Plus
Support device EPROM, Paged EPROM, parallel and serial EEPROM, FPGA Serial configuration PROM, NOR FLASH and NAND FLASH reservoir, BPROM, NVRAM,CPLD, MCU, Firmware HUB, ARM. standard logic devices(TTL\CMOS) etc, device operating voltage:1.8~9V
Encapsulation DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, μBGA, CSP, SCSP etc
Online communication interface USB 2.0(High Speed)
Configuration Options adaptor, CF card
Power Input AC 100V-240V/47-63Hz
Power Output 12V/2A
Dimension-Main Unit 280mm×170mm×57mm (L×W×H)
Built-in DOM 32Mb×1(default)
CF card 1(optional)
Operating system Windows NT/2000/XP/Win7/VISTA
SmartPRO 5000U-PLUS software is lifetime free update.

Package including:
1pc x New SmartPRO 5000U Programmer
1pc x USB Cable
1pc x CD Software
1pc x Power Adapter

Go to Buy: SmartPRO 5000U-PLUS Universal USB Programmer Lifetime Free Update Perfect for NXP NCF29XX and PCF79XX Chips

Tags: smartpro 5000u-plus, smartpro universal programmer , smartpro programmer
Prev: 2013 Newest Wellon Programmer VP-298 VP298
Next: New S-100 S100 Ultra-high Speed Stand-alone Universal Device Programmer Replace Beeprog