U-CHARER Magic Mobile phone Universal Travel Charger
Features:
1.NiMH/NiCd AA/AAA Battery .Withdraw the slippery board until it blocks.
Place 1 or 2 pces of AA or AAA rechargeable NiMh/NiCd batteries into the battery compartment, then press the circular button to release the slippery board. The green LED starts flickering, charging is in progress. If greenLED does not start flashing, it indicates that the microprocessor has detected reverse polarity or bad cells.
a/ Reverse polarity
Readjust battery (ies) position and makecorrect contact forpolarity (+and-)
b/ Bad cells
Remove battery (ies) and replace them.
For your reference please insert batteries as follows:
-Sign “+ "at side of the contact plates
-Sign “- " at side of the springs
2.Li-lon battery
-Withdraw the slippery board until it blocks.
-Adjust the Li-lon battery position, and make correct contact between terminals of charger and battery. When charging, just connect the battery to charger's terminals, the Universal Charger will identify automatically the polarities. The green LED starts flashing, charging is in progress.
Once Li-lon battery is fully charged, both Red and Green LED light on and it can be taken out to use
Safety Instructions:
Do not attempt to recharge any non-rechargeable batteries.
Do not mix cell types or capacities.
Do not expose charger to humidity to high temperatures. Always disconnect the charger when not in use.
When use USB port, only the red light on and the green light won't shine, so please disconnect your charger when your USB device is fully charged, or your USB device may be destroyed if over time charged.
Technical Datas:
Input:12V DC 500mA
USB output:5V 500mA
Charge Current:1000mA Max
Package List:
1pc x U-CHARGER main unit
1pc x Car charger
1pc x AC adapter
