SmartPRO 5000U-PLUS Universal USB Programmer for PCF79XX and NXP NCF29XX Serial Chips

The SmartPRO 5000U-Plus supports unlocking and programming of PCF79XX, NXP, and NCF29XX serial chips. Learn how to program PCF79XX chips with this versatile universal programmer.

Top 3 Reasons To Get the SmartPRO 5000U-PLUS Programmer

1. Patented I/O Port Drive Technology Eliminates IC Programming Failures

Universal programmers require compatibility with a wide range of chips, placing high demands on the programming I/O port. The SmartPRO 5000U-Plus features brand-new I/O port drive technology that enables each I/O port to transmit high-speed signals reliably. It suppresses signal overshoot, provides over-current protection, delivers adequate and sustained output current, withstands bus collisions, and quickly recovers from conflict states.

2. ICP Online Programming for Enhanced Usability and Flexibility

The dedicated ICP download line interface allows programming of chips directly on the circuit board. In offline ICP mode—without a computer connection—users can access data stored in the built-in DOM. With minimal ICP wiring, the device is portable and ideal for on-site debugging or firmware upgrades.

3. Extensive IC Support with Timely Updates

The SmartPRO 5000U-PLUS programmer supports a wide variety of ICs, including MCU, Flash, CPLD, and FPGA chips, thanks to strong relationships with major manufacturers. It offers accurate and timely support for new chip programming, ensuring customer needs are met comprehensively.

SmartPro 5000U-Plus PCF79XX Chips Support List:

• PCF7922@ICPLine
• PCF7922@TSSOP20
• PCF7926@ICPLine
• PCF7926@TSSOP20
• PCF7945@ICPLine
• PCF7945@TSSOP28
• PCF7945@TSSOP28(New)
• PCF7953@ICPLine
• PCF7953@TSSOP28
• PCF7953@TSSOP28I(New)
• PCF7961@ICPLine
• PCF7961@TSSOP20

SmartPro 5000U-Plus NCF29XX Chips Support List:

SmartPRO 5000U-PLUS Specifications

Type

SmartPRO 5000U-Plus

Supported Devices

EPROM, Paged EPROM, parallel and serial EEPROM, FPGA Serial configuration PROM, NOR FLASH and NAND FLASH, BPROM, NVRAM, CPLD, MCU, Firmware HUB, ARM, standard logic devices (TTL/CMOS), etc.
Device operating voltage: 1.8–9V

Supported Packages

DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, μBGA, CSP, SCSP, etc.

Online Communication Interface

USB 2.0 (High Speed)

Configuration Options

Adaptor, CF card

Power Input

AC 100V–240V / 47–63Hz

Power Output

12V / 2A

Dimensions (Main Unit)

280mm × 170mm × 57mm (L × W × H)

Built-in DOM

32Mb × 1 (default)

CF Card

1 (optional)

Operating System

Windows NT / 2000 / XP / Vista / Win7 /Win10 Pro

The SmartPRO 5000U-PLUS software includes lifetime free updates.

Package Includes:

• 1 × SmartPRO 5000U Programmer
• 1 × USB Cable
• 1 × Software CD
• 1 × Power Adapter