Battery Tester Measuring Current with AC/DC Multimeter
Note :This package does not include batteries.
Due to new rules of China Post Air, parcels must not include batteries,
otherwise it will not get through the custom.
DC and AC current, resistance, temperature, diode, transistor, continuity,
capacitance.
> It has polarity indication, data hold, MAX mode, overrange indication and auto
power off.
> It is easy to operate and is a ideal instrument tool.
Measuring AC/DC current >>>
Connect the negative(-) output lead of the selected clamp to the "COM" jack,
Connect the positive(+) output lead of the clamp to the "INPUT" jack.
Clamp the circuit to be measured with the clamp.
Read the reading on the display.
Features >>>
> Max.1000A AC/DC current measurement with current clamp 3 1/2-digit backlight
> LCD which has a max. reading 1999
> Manual/ auto range mode
> Maximum value hold mode
> Autoatic polarity indication
> Data-hold mode
> Overload protection
> Low battery indication
> Low power consumption
Specification>>>
Voltage DC: 200m/2/20/200/600V
Voltage AC: 2/20/200/600V
Current DC: 200u/2000u/20m/200m/2/10A
*Current DC: 200/1000A(with clamp)
Current AC: 200u/2000u/20m/200m/2/10A
*Current AC: 200/1000A(with clamp)
Resistance: 200/2k/20k/200k/2M/20MΩ
Temperature: -20~1000° /0~1800°
hFE: Vce approx.1.0V, Ib approx.2uA
Continuity: Less than 30Ω
Diode Check: approx.1.5V
Capacitance: 20n/200n/2u/20u/200u/1000uF
Display: LCD,1999 counts, updates 2-3 times/ sec
Overrange Indication: "OL" shown on the display
Negative Polarity Indication: "-"shown on the display
Battery:1.5V.AAA or equivalent,3 pieces (Not include in the package)
Operating Temperature:0-40°, <75% RH
Storage Temperature:-10-50°, <85% RH
Demensions:158X75X35mm
Weight: about 200g(include batteries)
Accessories:
1. Test leads2. K type thermocouple
3. Transistor test socket
