obd2 Scanner Lexia 3 PP2000 Full Chip Diagbox V7.83 with Firmware 921815C For Citroen/Peugeot OBDII Code Reder & diagnostic-tool
Highlight:
1:Software:V7.83 ;Firmwre :921815C
2:Gold Edge
3:12pcs NEC JAPAN Relays
4:7pcs Optocouplers
5:Japan original FUJITSU chip, SUMSUNG chip
Note:
1:It does not support virtual machine virtual box,it can't detect usb connection.
2:Please disconnect internet and WIFI on your real cmputer system.
3:Before install the software, please remeber to shut down your anti-virus software.
4:And then disconnect the internet and wifi .
5:Support system:
Diagbox Software :Win732 bit system
PP2000 Software : Support:XP System
Lexia 3 PP2000 Supported Functions:
Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
1. Read Identification
Displays complete identification of control unit, e.g. part nuMBer, software/hardware version, manufacturer, etc.
2. Read Fault Codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").Program supports report printing or copy to clipboard.
3. Clear Fault Codes
This function clears all stored fault codes and other diagnostic information
Note:
The diagnostic equipment can clear the fault code, but it will light up again after the permanent fault is cleared, and it needs to be repaired to clear it. Instantaneous faults and historical faults can be cleared directly.
4. Auto-Scan (Complete Car Scan/Test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6. Actuator Test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc.)
7. Programming Functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
8. Control Unit
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD
space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with
the latest service pack installed.
If customer requires, we can prepare ready to work PC.
Top 6 reasons to buy Lexia3 Full chip version:
1.Ours is the A+++++Quality than others.
2. Newest software version Diagbox V7.83
Diagbox Version:
Lexia parcel default CD Diagbox VERSION is V7.57,this is most stable function and easy to work.
Our Diagbox Suppoting Update to Latest Version V7.83, if u want to update to newest diagbox,please feel free to contact me and we will send u link to download Latest diagbox Version.
(please Disconnect internet when install software,otherwise device damaged and broken)
3. Full chip with golden edge NEC relay, A+ quality, more stable
Firmware Serial Reference NuMBer:921815C
4. with 4 cables, supports more old car models:
Q:what's the Function of clip cables?
A:Clip cables for old car modles before 2000 year
5. LEXIA3 Full Chips Version With Power Function:
For programming, diagbox support basic programming, but some programming like car alarm system need account username and password, we don't supply& haven't username and password, only for citroen and for eugeot center repair shop has username and password, please note it.
6： Support Multi-Language:
Lexia 3 PP2000 Software supported language:
English, Chinese, German, French, Japanese, Russian, Arabia, Spanish, Turkish, Danish, Iranian, Greek, Israel, Hungary, Indonesian, Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatia, Thai.
Lexia3 Diagbox Software supported language:
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech.
Car coverage
1.P2000,Lexia 3 is compatible with most for P-eugeot cars from 1995.
2.PP2000,Lexia-3 is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Software supports year:
(With red clip cable, supports more old car models.)
PP2000: 1998-2006
Diagbox: 2006-2016
For Ci-troen
C-Zero/ C1/ C2/ C3/ C3 PICASSO/ DS3/ C-ELYSEE/ C4/ C4 CACTUS/ C4 PICASSO/ DS4/ DS 5LS/
C5/ DS5 /C6 / C8/ C-CROSSER/ C4 AIRCROSS/ NEMO/ BERLINGO/ JUMPY/ JUMPER/ AX/ SAXO/
BX/ ZX/ XSARA/ XANTIA/ XM/ EVASION/ C15/ FUKANGFUKANG 988/ ELYSEE/ C-ELYSEE(R3)/ C-
TRIOMPHE/ C-QUATRE
For P-eugeot
iON/ 107/ 108 /206 207/ 207+/ 280/ 301/ HOGGAR/ 307/ 308/ RCZ/ 407/ 408/ 508/ 607/ 807/
1007/ 2008/ 3008/ 4007/ 4008/ 5008/ BIPPER/ PARTNER/ EXPERT/ 106/ 205/ 306/ 309/ 405/
406/ 605/ 806
Instructions for use:
Firstly,install the diabox.Then connect with the car and computer.
