Automotive pocket thermometer AAD802
AAD802 Measure Procedure
Open the battery cover by swirling anti-clockwise, replace the battery then close the battery cover tightly by swirling clockwise
Note:
Features
1. Switchable Function
2. Press /button once to change the temperature unit.
3. Data Hold Function
4. Press Hold button once to retain reading, or icon flashing
5. Then press Hold button once again to release the HOLD function.
2. Press /button once to change the temperature unit.
3. Data Hold Function
4. Press Hold button once to retain reading, or icon flashing
5. Then press Hold button once again to release the HOLD function.
AAD802 Measure Procedure
Press ON/OFF button once to switch on the thermometer it will perform a self-test with a flash of full segment display and jump to normal display
Take out the plastic probe cover, then penetrate the stainless steelprobe into test substance about 25mm(1)to get the reading when it become stable
Press ON/OFF button once to switch OFF the thermometer
AAD802 Specifications
Automatic power off after 10 minutes
Measurement range: -50 to +200/-58 to +392
Accuracy: between -50 to 200(-58 to +392),otherwise, more than ±2(±4)
Resolution:0.1°between -19.9°to 199.9°,otherwise 1°
Sampling Rate:1 second
Battery: 1pc×1.5 volt type LR44 or equivalent Probe size:125mm(L)
Ambient temperature:-10 to 50/ +14 to 122
Open the battery cover by swirling anti-clockwise, replace the battery then close the battery cover tightly by swirling clockwise
Note:
Not to be used inside an oven or microwave oven
Not to be used the probe cover to stir at high temperature substance
Package include:
1pc x Automotive pocket thermometer AAD802
Previous: 12V Car LED Battery Tester
Next: Immo Emulator for DAEWOO