ANCEL BZ700 OBD2 Scanner for Mercedes BENZ All System ABS SRS Airbag SAS TPMS Reset Car Diagnostic Tool Engine OBD Code Reader
-
Not only read and clear fault codes of the main systems (engine, airbag, transmission, ABS, SAS, SRS, EPB, DPF, TPMS, etc.), but also supports body, chassis, powertrain and all control modules.
-
Transmission adaptation, Battery Registration, Battery Voltage Test, Throttle Relearn, ABS Bleeding, TPMS Reset, EPB Reset, SAS Reset, Oil Reset etc.
-
Auto VIN technology can automatically identify model and year information in no time.（Only Mercedes BENZ is supported）
-
: English, German, French, Spanish, Russian, Portuguese, Finnish, Danish, Swedish, Norwegian.
-
with from 1991 to 2022.
MANUFACTURE-LEVEL DIAGNOSTICS FOR MERCEDES BENZ: You want to keep driving it as long as you can, right? There are few things your BENZ will require of you to maintain its longevity then — changing your oil, replace electric brake pads, and throttle relearn tasks. But one thing that does the most to ensure your car will run smoothly is taking care of your BENZ’s battery. The BZ700 registers the battery and checks the battery voltage to ensure your car doesn't break down on the road.
-
It supports full modes OBDII functions. Easily identify car problems and turn off engine lights. Help you pass emissions test and keep your car in best condition. Save gas and improve performance.
-
It can help before transmission problems become a big hassle. That's because most trouble codes come from your vehicle's transmission. With a transmission diagnostic tool, you can get a fault code if there is one.
-
The SRS (Supplemental Restraint System) is a device that deploys the airbag to protect the passenger before the second collision occurs. The BZ700 OBD2 scanner can read/clear the code and turn off the airbag warning light.
-
ABS automatically controls the braking force of the brake when the car brakes, so that the wheels do not lock and enter the state of edge rolling slip (slip rate is about 20%) to ensure the maximum grip between wheels and ground.
-
The BZ700 allows the scan tool to evaluate the battery charge level, monitor the short circuit current, register the battery change, activate the vehicle hibernation mode and charge the battery via the diagnostic socket.
-
: Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
-
Calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
-
this function supports routine maintenance of air condition modules, for example, air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization.
MANUFACTURER-LEVEL DIAGNOSTICS FOR MERCEDES -BENZ VEHICLE
-
This function supports routine maintenance of transmission modules, for example, reset adaptation values, adjust the oil level.
-
To put it simply, battery registration is a process of updating your vehicle with information that a brand new battery has been installed in your car.
-
Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
-
Relearns the throttle valve control value while clear or replaces the throttle value.
-
Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
-
Allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS reset after tires sensors are replaced or rotated.
-
System maintenance deactivates and reactivates the EPB system for replacement and initialization.
-
Allows you to perform adjustment of the steering angle sensor, which permanently stores the current steering wheel position as straight-ahead in the sensor. After calibrate sensor successfully, its fault memory will be automatically cleared.
-
Support service lamp reset, reset service mileage and service intervals.
FULL OBD LEVEL DIAGNOSTICS FOR ALL VEHICLE BRANDS
-
Read the fault code within 3 seconds and clear the pending fault code, and turn off the engine light.
-
Reads abundant live data stream and freeze frame data to monitor the operating status of the vehicle, including the status of the fuel system, engine coolant temperature, RPM and various sensor parameters.
-
The purpose of the readiness monitors is to test the emission control systems of the vehicle itself. The monitors are also known as emission monitors. Determine if your vehicle is ready for a smog test.
-
The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
-
The option displays the vehicle identification number (VIN),the calibration verification number (CVN), and other information of the test vehicle.
Ancel BZ700 OBD2 Scanner Vehicle Testing Coverage list:
-
with from 2000 to 2022.
-
Can't support 38PIN (107(1971-1989), 124(E Class 1984-1994)，129(SL Class 1989-2001)，126(S Class 1979-1991),140(S Class 1991-1998), 170(SLK Class 1996-2004),201(190 1982-1993)，202(C Class 1993-2000),208(Up to 2002), 210(E Class 1995-2002), 461(G Class)，463(G Class 1990-)
PRODUCT DESCRIPTION
-
Display: 2.8″ TFT LCD, 320X240 Pixels
-
Operation Temperature: 0°C ~ 50°C
-
Storage Temperature: -20°C ~ 70°C
-
Operating Voltage:8V-18V
-
Operating Temperature:0C-60C(32-140F)
-
Storage Temperature:-20℃-70℃(4-158F)
-
Dimension: 6.8*3.38*1.22 inches (L x W x H)
-
1*BZ700 OBD2 Scanner
-
1*Data Line
-
1*User's Manual
