Complete isolation-type inverter technology
Adoption of advanced SPWM technology, pure sine wave output
Dynamic current loop control technology to ensure inverter
reliable operation
Wide DC input voltage range
Low output harmonic distortion (THD≤5%)
Optional output voltage and frequency at 110/120VAC,50/60Hz
High conversion efficiency up to 95%
USB output 5VDC/1A*
RS485 communication port*
Extensive Electronic protection
﹡Only for the model of the USB output port or RS485 port.
Product Features:
|
| DC Input Terminal Positive |
| RS485 communication port(4) |
|
| DC input voltage range (1) |
| USB output port (5VDC/1A) |
|
| DC Input Terminal Negative |
| AC output switch |
|
| Ventilation Fan (2) |
| Mode switch(5) |
|
| Grounding Terminal | ⓫ | Fault indicator(red) (6) |
|
| AC Outlet (3) | ⓬ | Working indicator(green) (6) |
Note:24V system input voltage range is 21.6 ～32V; 48V system input voltage range is 43.2～60V.
1) Fan Ventilation
When the heat sink temperature is more than 50°C or internal temperature is more than 50°C, the fan will turn on automatically.When the heat sink temperature is lower than 40℃ and internal temperature is lower than 40°C, the fan will turn off automatically.
2) Mode Switch
The output mode can be changed by the mode switch. This mode can be switched online.
3)AC Outlet
| Protection and recover | Condition | Phenomenon | |||
|
| Parameter | IPower-12 | IPower-22 | IPower-42 |
|
| Over voltage protection and recover | Input Voltage Ui | Ui>16V | Ui>32V | Ui>64V | Output is OFF Green indicator fast flashing Buzzer sounds |
|
|
| Ui≤14.5V | Ui≤29V | Ui≤58V | Green indicator on solid The output is on |
| Low voltage protection and recover | Input Voltage Ui | Ui<10.8V | Ui<21.6V | Ui<43.2V | Output is OFF Green indicator slowly flashing Buzzer sounds |
|
|
| Ui≥12.5V | Ui≥25V | Ui≥50V | Green indicator on solid The output is on |
| Over tem. protection and recover | Tem.(T) | Heat sink T＞80℃ or Internal T＞60℃ | Inverter turns OFF | ||
|
|
| Heat sink T≤70℃ and Internal T≤50℃ | Inverter turns ON | ||
| Overload protection and recover | Output power S Rated power Pe | S=1.2Pe | Output is OFF after 15min Red indicator slowly flashing Buzzer sounds | ||
|
|
| S=1.5Pe① | Output is OFF after 1min Red indicator slowly flashing Buzzer sounds | ||
|
|
| S=1.8Pe① | Output is OFF after 10s Red indicator slowly flashing Buzzer sounds | ||
|
|
| S>2Pe(Rated input voltage) ① | Output is OFF after 5s Red indicator slowly flashing Buzzer sounds | ||
| Load short circuit protection① | Output is OFF immediately Red indicator fast flashing Buzzer sounds | ||||
①When appear output overload protection or load short circuit protection, it has three times auto-recover output function (The first time delay 5s, the second time delay 10s and the third times delay 15s).
| Model | IP2000-21 | IP2000-22 | IP2000-41 | IP2000-42 |
| Input Rated Voltage | 24VDC | 48VDC | ||
| Input Voltage Range | 21.6~36VDC | 43.2~60VDC | ||
| Input surge voltage | <40V | < 80V | ||
| No-load current | <0.6A | < 0.4A | ||
| Output Voltage | 110VAC(±5%) | 220VAC(±5%) | 110VAC(±5%) | 220VAC(±5%) |
| Output Continuous Power | 1600W | |||
| Output Power 15 min. | 2000W | |||
| Instantaneous impact power | 3200W | |||
| Output way | Single phase | |||
| Output Wave | Pure sine wave | |||
| Output Frequency | 50/60Hz(±0.2%) | |||
| Distortion THD | THD≤5%(Resistive load) | |||
| Max. Efficiency | 95% | 95% | 95% | 95% |
| Max. USB Output | 5VDC/1A | |||
| Working environment temperature | -20°C~+45°C | |||
| Storage temperature range | -35°C~+70°C | |||
| Humidity range | ≤95%（N.C.） | |||
| Enclosure | IP20 | |||
| Altitude | <5000m(Derating to operate according to IEC62040 at a height exceeding 1000 m) | |||
| Binding post | Φ 10mm | |||
| Overall dimension | 326.12×231.5×98.5mm | 326.12×231.5×98.5mm | ||
| Mounting dimension | 208×219.5mm | 163×219.5mm | ||
| Mounting hole size | Φ5.5mm | |||
| Net weight | 4.0kg | |||
Photo:
