Original NEC Key Adaptor Compatibility
Works Seamlessly with VVDI MB BGA Tool
No soldering, no wire jumpers, and no additional adaptors required.
Ongoing Support for More Versions
- Supports V51 and V57 versions for direct password retrieval.
- Supports on-board renewal for normal keys: V28, V35, V40, V51, V57.
- Supports on-board renewal for keyless go keys: V03, V06, V07, V08, V09, V61.
- Supports writing key files via IR or on-board for normal keys: V28, V35, V40, V51, V57.
- Supports writing key files via IR or on-board for keyless go keys: V03, V05, V06, V07, V08, V09, V59, V61.
All the above keys use an NEC chip (non-BGA type). To use the adaptor:
- You must desolder the NEC chip from the key and place it onto the NEC adaptor.
- For NEC V51 and V57 versions, you can read the password directly from a working key—no need to retrieve it from the EIS.
- For all NEC key types, you must use the “Identification key” function to read the key once before performing a renew or write operation.

How to place the NEC key chip onto the adaptor for read/write/renew operations:

Important Notes
The NEC Key Adaptor is optional. An ESL renewal adaptor is currently under development and will be released at a later date.
Package Contents
- 1 x VVDI MB NEC Key Adaptor







































