Portable Industrial Digital Thermometer Hygrometer K-type Thermocouple Lab Air Temperature Humidity Meter C/F USB Data Logger
That manual will guide you how to use this premium quality and accuratemeter distinctly.
Humidity & temperature meter are widely apply on lab, warehouse,airconditioning system and quality control etc.
Features:
(1). Large LCD dual display
(2). Humidity & temperature measuring
(3). Humidity & temperature Max / Min measuring
(4). Data hold
(5). ℃/℉ selectable
(6). Low battery indication
(7). Auto power off
(8). LCD back light
(9). K-type themocouple temperature measuring
Operations:
(1). Open battery door, install 9V battery correctly. Press ON/OFF
button to turn on for measuring.
(2). ℃/℉ selection: Press ℃/℉ button for celsius or fahrenheittemperaturemeasuring unit.
(3). Temperature Max / Min measurement: Press TEM MAX MINbutton to obtain maximum temperature value. Press T MAX MINbutton again, LCD will display minimum temperature value andlock the data.
(4). Humidity Max / Min measurement: Press RH MAX MIN button tomeasuring maximum temperature value. Press RH MAX MINbutton again, LCD will display minimum temperature value andlock the data.
(5). Data hold: While in normal measuring status, the display oftemperature reading can be hold at any time by pressing the TEMHOLD button, press T HOLD again to exit the mode. On humidityhold reading same as by RH HOLD.
(6).K-type thermometer measurement: Conect the k-type probe to themeter, LCD will display TYPE K indicates wide range temperaturemeasuring mode. When unplug the k-type probe, the unit back tonormal measure mode.
(7).LCD back light: Press ℃/℉ more than 2 seconds will turn on /turn off the light.
(8).ON / OFF: Automatic power off after 10 mins without any operation.
Press ON / OFF to turn off the meter.
Specifications:
Temperature range: -10℃ to 50℃
K-type range:-20℃ to 1000℃
Relative humidity range:5.0%RH to 98%RH
Accuracy:
Temperature: ±1℃（±1.8°F)
K-TYPE: ±3% or ±2℃
Relative humidity: ±3.5%RH
Resolution:
Temperature: 0.1℃/0.1°F；K-TYPE: 1℃
Realtive humidity: 0.1%RH
Sampling rate: 2.5 times/sec
Power supply: 9V battery(Not Included)
Operating condictions: -10℃ to 50℃(32°F to 122°F)
≤80%RH non-condensing
Storage condictions: -10℃ to 50℃(32°F to 122°F)
0%RH to 90%RH
Package Included:
1 x Humidity & Temperature meter
1 x Instruction manual
1 x K-type thermocouple
1 x Plastic Box
![[Full Version] V2022.12.1 KT200 ECU Programmer Master Version Support OBD BOOT BDM JTAG & ECU Maintenance/ DTC Code Removal With Free Damaos](/upload/pro/kt200-ecu-programmer-master-full-version-200.jpg)
