Features:
- 100% Brand new and good quality
- Large anti -UV & Anti-glare LCD screen
- All-in-one design with digital signal processing system
- Using chip technology for most of the components
- Multiple indicator functions as the L/R Turn Signal, High Beam, Position Lights, N Lights
- High withstand voltage up to 100V
- Waterproof & Anti-vibration
- Fits for most motorcycle that is with 4 stroke, 2 / 4 Cylinders (default as 1 cylinder of the setting)
- Please allow 1-2 cm difference due to manual measurement.
- Please check size to make sure the fitment before bidding. Thank you.
- Our digital images are as accurate as possible. However, different monitors may cause colors to vary slightly.
Specifications:
- Working voltage : 8-18V
- Rated voltage: DC 12V
- Working temperature: -20 - +70℃
- Storage temperature: -30 - +80 ℃
- Digital display speed range: 0-199km/h (error +10%)
- Needle display rpm range: 0-12000rpm (error +5%)
- Digital display odo distance range: 0-99999.9km
- Gear indicator: 1- 6
- Backlight: Blue
- Installation diameter: 9cm
- Height: 5.3cm
- Cable Length: 12cm
Note:
- No friction or contact between the hall probe and the magnet
- Engine rotate speed comes from the ignition signal. The sensor wire is normally contacted with the positive side of the magnetor or directly wired on the rectifier
- Oil Mass can be wired on the original sensor
- Do NOT wired on the headlight if it had been modified as the HID Xenon light. Instead, connect it on the headlight control wiring
Package Included:
- 1 x motorcycle speedometer
- 1 x Sensor cable
- 1 x Magnetic steel
- 1 x User manual
![[Full Version] V2022.12.1 KT200 ECU Programmer Master Version Support OBD BOOT BDM JTAG & ECU Maintenance/ DTC Code Removal With Free Damaos](/upload/pro/kt200-ecu-programmer-master-full-version-200.jpg)
