ND900 Mini Transponder Key Programmer
Attention: Buy this bundle package, and you will receive 24 tokens for G Chip Clone—12 tokens preloaded in the machine plus 12 tokens available with one-time free update. Once all 24 tokens are used, additional tokens for G Chip cloning can be purchased on our site for $30 per 12 tokens.
For one-time free activation: You must provide a photo showing both the ND900 MINI and The Key OBD PRO in the same image.
CN900 Mini and ND900 Mini V5.18 Update
TJECU MINI900 TOYOKEY OBD is newly confirmed to support writing Toyota Smart cards via OBD, covering 3370-5290-A433-F433 types.
(Update notice: TJECU’s next planned update will enable initialization of Toyota 0020 type 8A smart cards in all-key-lost scenarios.)
Top Reasons to Get the ND900 Mini Key Programmer
- RFID identification at 125KHz, 134.2KHz, and 13MHz
- RF data reception from 27–900MHz
- RF radio frequency identification supporting all kinds of remote controls
- RF data transmission for remote control simulation testing
- Multiple vehicle anti-theft fault detection and matching verification
- Portable design with super-long standby time
- Supports four GSM frequency bands: 850/900/1800/1900MHz
- GSM/GPRS SIM capability
- USB 2.0 connectivity
- Bluetooth 4.0 support
- Note: Product improvements may result in specification changes without notice.
ND900 Mini can use CN5 Chip to copy Toyota G Chip and 4D Chip.
Smart ND900 Mini Transponder Programmer Introduction
- Can directly copy 4C and other chips like Toyota 4D67
- Supports copying 4D chips
- Can recognize and unlock locked ID48 chips
- Supports copying 46 chips
- Toyota G Chips Clone capability
Smart ND900 Mini Transponder Programmer Main Features
Function 1
- Reads chip codes for 11, 12, 13, 33, T5, 40, 41, 42, 44, 45, 46, 48, 4C, 4D, 8C, and 8E chips, with detailed format support for ID48 and 4D chips.
- New identification function for Toyota "G" chip keys (model year: 2010; chip: 4D-72).
It indicates whether a Toyota key is a main or vice key. Future updates will add identification functions for Chinese vehicles.
Function 2
Identifies Toyota smart keys and reads their data.
Function 3
Supports copying chips including 11, 12, 13, 33, T5, 41, and 42, as well as partial support for 44 and 45 chips.
Using "FREE" dedicated chips, it can directly copy non-battery 4C and 4D chips. (Note: CN1 = 4C, CN2 = 4D are special chip names.)
Function 4
When connected to Chinese PC software, it enables unlimited saving of read key code data.
Function 5
Supports chip programming: built-in HITAGETI functionality allows writing ID46 Renault Crypto chips.
Function 6
Can start the chip without removing the ECU (e.g., Benz W140).
Function 7
Unlocks 48 chips, except crypto-locked 48 chips.
Function 8
Calculates PIN codes for Hyundai and Kia vehicles (pre-2007 models) using the last 6 digits of the VIN.
Function 9
Supports key activation and PIN code calculation for over 60 car models.
Programs all types of Fiat keys (11, 13, 33) and handles three types of 48-chip anti-theft systems.
Function 10
Upgraded to identify HONDA_46, CRV_46, CIVIC_46, and Mitsubishi 46 chips.
Ordinary 60 chips can be programmed as 66/67/68/71/74 variants.
Function 11
Upgraded to copy CN1 (4C) and CN2 (4D) chips (dimensions: 6mm × 12mm × 4mm).
Supports software updates, including future features like copying induction cards for electronic gates.
Function 12
Can copy all ID46 chips, including: BMW, Acura, Honda CR-V/FIT (new), Accord (2008), Civic; Mazda/Haima; Mitsubishi; Buick, GMC Cruze; Chery Tiggo, A3; Nissan Tiida, Tenna, Livina, Sylphy, Qashqai, Q35; Brilliance; Peugeot/Citroen 307, 206; Triumph Senna 406 (2001); Picasso; Suzuki Swift, SX4; Land Rover Freelander; Geely dedicated 46 chip.
Function 13
Can copy 4D chips.
Function 14
Toyota G Chips Cloner.
Package Includes
- 1 pc × ND900 Mini Key Programmer











![[Full Version] KT200 ECU Programmer Master Version Support OBD BOOT BDM JTAG & ECU Maintenance/ DTC Code Removal With Free Damaos](/upload/pro/kt200-ecu-programmer-master-full-version-200.jpg)















