V2.13 KTAG K-TAG Firmware V6.070 ECU Programming Tool Master Version with Unlimited Token and ECM TITANIUM V1.61 for Free
Top 6 Reasons to Get New KTAG:
1. Latest software: V2.13, Latest firmware: V6.070 (BMW Gasoline F Chassis and Mercedes W222 are Newly added)
2. Multi-Language: English/ Italian/ German/ French/ Portuguese/ Spanish
3. Available Protocols for K-TAG: BDM MOTOROLA MPC5xx
4. SupportS BDM Function Well
5.Get ECM TITANIUM V1.61 with 18259 DRIVER for Free, save 29.99USD.
6. Unlimited tokens version, no need desolder chips. More easily to use.
We add tokens programming software on the CD. Once tokens run over, follow our video to program tokens step by step. No need remove the token chip from the main board, no need desolder chips.
What should you pay attention to when you operate on K-TAG:
1. Please do not connect your computer to internet when you use this device, do not update the device in any way!
2. When you used up tokens, you can use the manual we provide to add new tokens , so it is unlimited tokens version.
3. Please close anti-virus software when you use the software.
V2.13 KTAG K-TAG Firmware V6.070 ECU Programmer Description:
K-TAG works in perfect harmony. Easy to learn how to use K-TAG, because all the communication protocols operate along similar principles. Once you have learned to use a protocol, you will naturally use all the others. Alientech knows what it means to work in motion. For this reason the research methods of the protocols and choice of vehicles are detailed and ordered.
Unlike many ECU programming tools, with K-TAG you have at your disposal only the applications you really need. Once you have the hardware, you can choose which group of protocols to enable and then start working. In this page you can find a complete list of the ECU currently supported by K-TAG.
1.GREEN-CAN L
2.ORANGE-VKEY
3.YELLOW-K LINE
4.ORANGE-VKEY
5. RED-VECU
6.BLACK-GND
7.BLACK-GND
8.PURPLE-VPP
9.RED-VECU
10.WHITE-CAN H
Compare between new and old KTAG:
Cables From Left to Right:
K-tag ksuite supported list
Just as the full range of Alientech programmers, K-TAG is available both in Master and Slave version. This way, Slave user can rely on the larger network of Master in the chiptuning field.The only thing that K-TAG can't support: OBD Communication. But for that you can count on KESSv2.
To use K-Tag at best on any kind of Electronic Control Unit, Alientech offers you a wide range of special adapters, to be soldered on the ECU or to be used on the positioning frame.
Following Details of the Accessories Available in Car List Catalog Per Group of Protocols of Communication
BDM Motorola MPC5XX
14AS00T01S: Adapter to be soldered to the ECU
14AS00T02S: Cable with connector to be soldered to the ECU
14AS00T03S: Adapter to be soldered to the ECU
14AS00T04S: Adapter to be soldered to the ECU
14AM00T00M: Board for connection through positioning frame
14AM00T01M: Board for connection through positioning frame
14AM00T02M: Board for connection through positioning frame
14AM00TBAS + 14AM00TB01: Board for connection through positioning frame, with pull-out tip 14AM00TB01
14AM00TBAS + 14AM00TB02: Board for connection through positioning frame, with pull-out tip 14AM00TB02
14AM00TBAS + 14AM00TB03: Board for connection through positioning frame, with pull-out tip 14AM00TB03
J-TAG Nexus MPC5xx
14AS00T05S: Adapter to be soldered to the ECU
14AM00T05M: Board for connection through positioning frame
14AM00T06M: Board for connection through positioning frame
J-TAG RENESAS SH705xx
14AM00T07M: Write Board for connection through positioning frame
14AM00T08M: Write Board for connection through positioning frame
14AM00T09M: Write Board for connection through positioning frame
14AM00T10M: Read Board for connection through positioning frame
14AM00T11M: Read Board for connection through positioning frame
BOOTLOADER INFINEON TRICORE
14P600KT04: Board for connection through positioning frame
BOOTLOADER ST10
14AM00T03M: Board for connection through positioning frame
What are the differences among all K-TAG ECU tunning tools:
Package list:
What are the differences among all K-TAG ECU tunning tools:
| Item number | SE80 | SE80-B | SE80-C | SE80-D | SE80-E |
| Firmware version | V5.001 | V6.070 | V6.070 | V7.003 | V5.001 |
| Software version | Ksuite V2.10 | Ksuite V2.13 | Ksuite V2.13 | KTM100 V2.13 | Ksuite V2.10 |
| Token charging | PC programming | one button click | PC programming | one button click | PC programming |
| BMW F chassis petrol and Mercedes-Benz W222 | NO | NO | NO | YES | NO |
| Language | Multi | Multi | Multi | English, Italian, Portuguese, other needs customize | Multi |
| Opened protols | Part | over 95% | over 95% | Almost ALL | Part |
Package list:
![[Basic Auto Version] KT200 ECU Programmer Master Version Support ECU Maintenance Chip Tuning DTC Code Removal OBD/BOOT/BDM/JTAG](/upload/pro/kt200-ecu-programmer-auto-version-200.jpg)
