Yanhua BMW F/G Chassis Odometer Wiring Harness
1.Use Yanhua BMW F/G chassis odometer wiring harness connects the odometer and power the wiring harness.
2.Press the wake-up button which is located in the lower left corner of the odometer to light up the instrument and check the mileage.
UKOBD2 Provide top quality Yanhua BMW F/G Chassis Odometer Wiring Harness, if you need Yanhua BMW F/G Chassis Odometer Wiring Harness, or have any questions about Yanhua BMW F/G Chassis Odometer Wiring Harness, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of Yanhua BMW F/G Chassis Odometer Wiring Harness
Yanhua BMW F/G Chassis Odometer Wiring Harness
A reliable tool for resetting the Odometer on BMW F/G chassis vehicles.
Function
The Yanhua BMW F/G Chassis Odometer Wiring Harness connects to the odometer and provides power through a dedicated wiring harness. To activate the instrument cluster and view the mileage, press the wake-up button located in the lower left corner of the Odometer.
Operation Instructions
When resetting an odometer that requires simulator chip replacement and filter installation, follow this sequence:
- First, reset the simulator chips.
- Then, use the Yanhua BMW F/G Chassis Odometer Wiring Harness to power up the odometer and verify successful resetting.
- After confirmation, install the filter.
- Once the filter is installed, use the wiring harness again to light up the odometer and ensure it displays normally.
- Finally, reinstall the odometer into the vehicle.
This method helps prevent common issues such as a blank screen, failure to illuminate, or appearance of a red dot after reinstallation.
Package Includes
1pc × Yanhua BMW F/G Chassis Odometer Wiring Harness