2025 Xhorse XDNPBGGL BMW G Series BDC2 Adapter with Free BMW G-Chassis-BDC2 License for Key Tool Plus PAD, VVDI2 and MIDI Advanced Version
Xhorse XDNPBGGL BMW G Series BDC2 Adapter Get Free Activation of the BMW G-chassis-BDC2 IMMO Work with VVDI2, Key Tool Plus PAD, Midi Advanced Version
UKOBD2 Provide top quality 2025 Xhorse XDNPBGGL BMW G Series BDC2 Adapter with Free BMW G-Chassis-BDC2 License for Key Tool Plus PAD, VVDI2 and MIDI Advanced Version, if you need 2025 Xhorse XDNPBGGL BMW G Series BDC2 Adapter with Free BMW G-Chassis-BDC2 License for Key Tool Plus PAD, VVDI2 and MIDI Advanced Version, or have any questions about 2025 Xhorse XDNPBGGL BMW G Series BDC2 Adapter with Free BMW G-Chassis-BDC2 License for Key Tool Plus PAD, VVDI2 and MIDI Advanced Version, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of 2025 Xhorse XDNPBGGL BMW G Series BDC2 Adapter with Free BMW G-Chassis-BDC2 License for Key Tool Plus PAD, VVDI2 and MIDI Advanced Version
Highlights:
1. BMW G series BDC2 add key on bench.
2. Work with Key Tool Plus PAD, VVDI2 and MIDI Advanced Version.
3. To learn and verify the key, install the BDC2 in the car or use a test bench like GODIAG BDC2 Test Platform
3. Get Free Activation of the BMW G-chassis-BDC2 IMMO from July 31, 2025 until August 14, 2025. ( Please Leave Serial Number )
Additional Important Information:
1. Free BMW G-chassis-BDC2 immo system activation is included with the purchase of an adapter for pre-orders only.
2. The pre-order period runs from today (July 31, 2025) until August 14, 2025.
3. Please note: Activation after the pre-order period ends will require payment (Cost $30)
Vehicle List:
5 Series (G30/G31/G38) 2016.11-2020.8
6 Series (G32) 2017.7-2020.6
7 Series (G11/G12) 2015.7-2019.2
X3 (G01/G08/F97) 2017.12-2021.8
X4 (G02/F98) 2018.4-2021.7
M5 (F90) November 2017.11-2020.6
Rolls-Royce 2018-
How to connect Xhorse BMW-G BDC2 Adapter?
1. Align the 3 positioning pins with the corresponding holes on the chassis.
2. Press down firmly on th adapter at the CON7/CON8 locations until it is fully seated.
3. Verify the accurate positioning of the RST/EEPROM_2/GND pins.
4. Slide the adapter latch to the LOCK position.