Universal Programmer VP490
Universal Programmer VP4901.It is an advanced, high precision and multipurpose unit. 2.It shall satisfy a wide range of needs of our fast growing market.
UKOBD2 Provide top quality Universal Programmer VP490, if you need Universal Programmer VP490, or have any questions about Universal Programmer VP490, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of Universal Programmer VP490
Universal Programmer VP490
The VP-490 Programmer is an advanced, high precision and multipurpose unit. It shall satisfy a wide range of needs of our fast growing market.
The VP-490 surpasses other programmers on our market In terms of functionality and class as well as it offers an astonishing price/capability ratio.
The Programmer Can Be Successfully Used For:
chip-tuning,
RTV service and maintenance shops,
computer service shops for BIOS updating,
computer mainboard repairs (damages caused by faulty BIOS update operation), and in other circumstances where programming of memory or microprocessor is required.
APPLICATION:
air-bag repairs
chip-tuning
washing machines and freezers repairs
mobile phones repairs
radio and TV-sets repairs
damaged motherboard's BIOS repairs
printers repairs
FEATURES:
48 pin ZIF socket with universal pin drives,
Dimensions:166×108×26 mm,
Weight: 300 g,
Over 19000 devices supported,
Interface with Laptop/PC computer through USB port,
Accepts standard file formats: JEDEC, INTEL (Extended) HEX, Motorola S record, BIN,
Manages 16 and 32 bit word split (Set Programming),
Supports most compilers in JEDEC format, including ABEL, CUPL, PALASM, TANGO PLD, OrCAD PLD, PLD Designer and ISDATA,
Easy and quick software updates ,
Possible substitution for squire-wave oscillator 1kHz to 125kHz,
Built-in frequency meter up to 100kHz
8-channel logic analyzer
Optimum programming for each individual device,
Automatically identifies the manufacturer and type of E(E)PROMs, Auto identifies TTL/CMOS logic IC
Device insertion and poor pin-contact check,
Supports 1.5V Low voltage devices,
No need for external adapters for most devices,
Auto-run mode starts programming automatically upon detection of chip insertion,
Supports IC Card programming
Fastest programming on the market. Programming of 89C58 in less than 4 seconds,
Supports MS Windows XP/2000/NT/9x/ME.
DEVICE SUPPORT:
EPROM: N/CMOS E(E)PROM, SeriesE(E)PROM, and FLASH Memory
PLD: CPLD, EPLD, GAL,PEEL,PALCE (and more)
Microcontrollers: Atmel, Intel, Microchip, Signetics, Zilog, etc.
Packing List:
1pc---V-490 Programmer
1pcs---cabling,
1pcs---manual,
1pcs----Software CD.
Go to Buy: Universal Programmer VP490