OBDSTAR DC706 ECU Tool Full Version with MP001 Set for Car and Motorcycle ECM & TCM & BODY Clone by OBD or BENCH

OBDSTAR DC706 ECU Tool Full Version Supports ECM & TCM & BODY Clone by OBD or BENCHOBDSTAR MP001 programmer Upgraded version of the P002 or P003 or P003+ adapters.ECU Clone for Cars and Motorcycles.

UKOBD2 Provide top quality OBDSTAR DC706 ECU Tool Full Version with MP001 Set for Car and Motorcycle ECM & TCM & BODY Clone by OBD or BENCH, if you need OBDSTAR DC706 ECU Tool Full Version with MP001 Set for Car and Motorcycle ECM & TCM & BODY Clone by OBD or BENCH, or have any questions about OBDSTAR DC706 ECU Tool Full Version with MP001 Set for Car and Motorcycle ECM & TCM & BODY Clone by OBD or BENCH, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of OBDSTAR DC706 ECU Tool Full Version with MP001 Set for Car and Motorcycle ECM & TCM & BODY Clone by OBD or BENCH

OBDSTAR DC706 ECU Tool Full Version with MP001 Set for Car and Motorcycle ECM & TCM & BODY Clone by OBD or BENCH

The OBDSTAR DC706 ECU tool is designed for vehicle ECM, TCM, and body/other system ECU flashing. It supports reading ECU information, R/W EEPROM/DFlash/PFlash/MAP, resetting ECU (Virgin), mileage calibration, reading IMMO pincode, ECU recovery, and more—all via OBD or bench mode—making ECU cloning simple and efficient.

The included MP001 Set enables read/write functionality for Simos 18 and additional ECUs.

Package Contents

• 1pc x DC706 tablet PC
• 1pc x 12V2A charger
• 1pc x M001
• 1pc x P004 adapter
• 1pc x BENCH-B V2 Cable Set
• 1pc x Quick start guide/certificate
• 1pc x OBDSTAR MP001 Programmer
• 1pc x OBDSTAR C4-01 Host
• 1pc x W004 Read/Write soldering wire
• 1pc x W005 Read/Write soldering wire
• 1pc x W006 Clock frequency wire
• 1pc x OBDSTAR ECU Bench Jumper

OBDSTAR DC706 Full Version with MP001 Set – Key Features

1. R/W EEPROM, DFlash, PFlash, MAP; reset ECU (Virgin); calibrate mileage; read IMMO pincode; ECU recovery
2. Supports over 710+ ECM types
3. Supports over 120+ other ECU types (AIRBAG, BCM, BSI, CEM, DDM/PDM, DIM, EPS, KeyLess (RFHUB/RFHM), KVM, RFA, SAM, etc.)
4. Supports VW DQXXX (TCM) mileage calibration
5. Supports motorcycle Delphi MT05, MT05.2, MT05.3 ECU Clone
6. Supports motorcycle BRP ME17.8.5 ECU Clone
7. Supports Piaggio series engine ECU Clone (e.g., MIU G4 (M4G1))
8. Intelligent search by brand, model, part nuMBer, ECU manufacturer, MCU controller type
9. Automatic identification support
10. Comprehensive help data files
11. Operation via OBD or Bench mode
12. Please refer to the OBDSTAR DC706 Full Version Support List
13. One Year Free Online Update
14. DC706 ECU Tool Full Version supports Indian TATA and Mahindra (Check in V30.41 ECM software)
15. Supports HP, Fiat IAW 9GF/9GV/7GF/10GF, Simos, and other ECUs
16. MP001 fully supports read/write, clone, and data processing functions for automotive, commercial vehicles, new energy vehicles, motorcycles, and marine (jet-ski) applications
17. MP001 includes all functionalities of P003+ and adds support for SIMOS 18 (due to its special boot mode requiring more IO ports; P003+ has only 4 IO ports, while MP001 offers up to 12 IO ports, ensuring compatibility with future ECM requirements)

Important Notes

• Our Distributor Code: 0086A002
• Does not support DQ250 units manufactured before 2008 using the old protocol

Optional Accessories

OBDSTAR VW 7-in-1 TCM Kit – Supports ECU clone, Read/Write MAP, Diag, Cluster Calibration, and more for VW and AUDI automatic transmissions. Operates via OBD or bench mode without removing the TCM, offering a user-friendly, time-saving solution.

OBDSTAR TCM Connectors – Designed for transmission mileage calibration and ECU cloning. No jumper connections required; one-click read/write functionality ensures safe, fast, and easy operation.

OBDSTAR C4-07 (MB-VGS4-0-NAG2) Adapter Kit Full Configuration – Compatible with Mercedes-Benz vehicles equipped with VGS4-0 NAG2 7G-Tronic TCU (FBS4/DAS4 generation). Supports solder-free virginizing of used TCM via JTAG mode and personalization (data transfer) via BENCH or OBD mode, delivering results equivalent to full TCM cloning.

OBDSTAR C4-08 (MB-VGS4-500-NAG2) Adapter Kit – Supports solder-free virginizing of used TCM via JTAG mode and personalization (data transfer) via BENCH or OBD mode, achieving the same result as TCM cloning.

OBDSTAR C4-09 (MB91F526) Adapter Kit – Enables reading/writing FLASH, DFLASH, and immobilizer data decryption.

OBDSTAR DC706 Functions

1. ECU Clone – Supported via OBD or Bench mode
2. ECM Clone for Cars (Bosch, Continental, Delphi, Denso, Magneti Marelli, Siemens, etc.)
3. ECM Clone for Motorcycles (Bosch, Delphi, EFI, etc.)
4. TCM Clone (Ac Delco, Bosch, Continental, Getrag, GM, Kefico, Siemens, Temic, ZF, etc.)
5. Body/Other System Clone (FCA, FIAT, FORD, GM/OPEL, LAND ROVER/JAGUAR, PSA, SMART, VOLVO, etc.)

Supported ECU Manufacturers

ALPS
Autoliv
Bosch
Continental
Delphi
Denso
Johnson Controls
Lear
Magneti Marelli
Siemens
Temic
Valeo

Supported Vehicle Brands

Cars

ASTON MARTIN
BMW
FAW
FCA (ALFA ROMEO, CHRYSLER, DODGE, FIAT...)
FORD/LINCOLN
GM/OPEL
HYUNDAI/KIA
LAND ROVER/JAGUAR
LUXGEN
MASERATI
MAZDA
MITSUBISHI
NISSAN
OPEL
PSA
SMART
SUBARU
SUZUKI
VOLVO
VW/AUDI/SEAT/SKODA

Motorcycles

APRILIA
BRP
CFMOTO
DERBI
GILERA
GUZZI
PEUGEOT
PIAGGIO
QJBENELLI
VESPA

OBDSTAR DC706 Function Display

1. Main Page / Brand Supported

2. ECM Clone for Cars

3. ECM Clone for Motorcycles

4. TCM Clone

5. Body/Other Clone

OBDSTAR MP001 Set (MP001 Programmer + C4-01 Host + W004/W005/W006/ECU Bench Jumper) – Advantages

• MP001 is the latest multifunctional programmer from OBDSTAR, supporting full read/write, clone, and data processing for automotive, commercial, new energy, motorcycle, and marine (jet-ski) applications
• MP001 includes all features of P003+ and adds enhanced SIMOS 18 support (due to its unique boot mode requiring additional IO ports; P003+ provides 4 IO ports, while MP001 offers up to 12, meeting future ECM demands)

Models Supported Exclusively by MP001

Software Functions

EEPROM/MCU reading and writing
Key flashing
Steering angle repair
Body computer data processing
Immo off
Pincode reading
Battery module repair
Instrument repair
Additional functions under development

Note

• Different tablet models require specific configuration software
• ECU bench jumper cables are required for MP001 use and are included in the package by default

MP001 Kit Supported Models

Go to Buy: OBDSTAR DC706 ECU Tool Full Version with MP001 Set for Car and Motorcycle ECM & TCM & BODY Clone by OBD or BENCH