M16 GPS Electronics Accessories HUD Head Up Display Speedometer Speed Alarm Windshield for All Cars Projector
M16 GPS Electronics Accessories HUD Head Up Display Speedometer Speed Alarm Windshield for All Cars Projector
UKOBD2 Provide top quality M16 GPS Electronics Accessories HUD Head Up Display Speedometer Speed Alarm Windshield for All Cars Projector, if you need M16 GPS Electronics Accessories HUD Head Up Display Speedometer Speed Alarm Windshield for All Cars Projector, or have any questions about M16 GPS Electronics Accessories HUD Head Up Display Speedometer Speed Alarm Windshield for All Cars Projector, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of M16 GPS Electronics Accessories HUD Head Up Display Speedometer Speed Alarm Windshield for All Cars Projector
Product function:
1. Satellite icon, flashing means searching for satellites, the GPS light stops flashing and stays on after the satellites are found
2. Driving direction: After the vehicle speed>5KM / H, display the driving direction,
W=West, N=North, S=South, E=East
3. Overspeed alarm icon flashes when the vehicle speed exceeds the set value
4. Voltage icon and fatigue driving icon
5.Light sensor:HUD can automatically adjust the brightness according to the environment
6. Multi-function display area
7. a +=100km acceleration, ASL=altitude, MIN=travel time, TRIP=travel mileage
8. Display speed progress bar
9. Speed display area
10. Speed unit: MPH=Mile/hour ,KM/H=kilometer/hour
New GPS models Suitable for all car
1.GPS+Beidou dual chip
2.USB power supply O power consumption
3.Speed lubrication does not change speed easily
M16 GPS-HEAD UP DISPLAY
Vehicle speed/100 km acceleration/altitude/driving time/driving distance/system time/Driving direction/speeding alarm/voltage icon/fatigue driving reminder
Improve driving safety
Set different parameters for over-limit alarm and sound alarm to improve driving safety
Main functions of HUD
Multiplescreens,one-button switching
Manually set the driving data you need to display, and the button operation is convenient, you can switch the mode you want
You can connect anywhere you want. The two interfaces can be selected at will, and the wiring is more convenient.
Independent key function,one touch, choose your needs
Using 10 Hz high refresh rate GPS + Beidou dual-mode chip
Refresh rate 10 sheets/second, fast refresh speed, no delay
Introducing the core algorithm of Taiwan technology, adding speed lubrication effect does not jump speed, the display is more consistent and smooth
Real-time display of travel time, accurately grasp the time of road section
driven distance
Accurate vehicle actual distance traveled from start to finish
Tired driving reminder
When you drive for more than 4 hours, the machine alarm sounds.Remind youto take a break
Satellite clock, no difference in minutes and seconds, not affected by natural factors such as weather
The satellite collection altitude is not affected by natural factors such as weather, and the positioning accuracy is very high
GPS precise positioning / real-time synchronous display data.Satellite data collection, not affected by weather
It takes time for the car to accelerate from Okm / h to 100km / h, and important reference data for the vehicle's dynamic performance
Automatic brightness adjustment/manual adjustment, automatically adjusts the display according to the intensity of the outside world;the brightness makes it clearly visible in strong light
Automatically turn on and off when the car starts and stops
GPS FAQ:
1.The screen without any display, and no power
Check whether the USB cable is damaged, replace the USB cable for testing, and prohibit the use of voltage higher than 5V for power supply
2.Without car speed
After HUD power-on, the satellite icon flashes will start to find the satellite. Please driving the car to the road. It will work after it stops flashing
3.Inaccurate time
When the device search the satellite successfully(the default 8:00 will change to China local time), set it to your local time and save and exit.
4.Speed is not correct
(1) If the unit is correct,km KM/mile MPH, (speed unit switch reference settings item)
(2) The car factory had increased speed(5-7%)than real for drivers’ safety,satellite data is strictly follow the international standards
(3) Fine-tuning the vehicle speed, e.g. meter display 100 Km/h, machine display 105Km/h,default value 107-5=102
5.Driving direction display error
After the vehicle speed exceeds 5KM / H, the direction can be displayed normally.
6.Speed is still displayed after the car stops
Under the underground parking lot, tunnel, under the overpass, there will be unstable satellite drift when there is obstruction.
7.Turn off the buzzer
Push leftfor 2 seconds to turn off the buzzer, do it again to turn on.