Luxmeter Luminometer Tester Photometer Digital LCD Light Meter LX101
Luxmeter Luminometer Tester Photometer Digital LCD Light Meter LX101
UKOBD2 Provide top quality Luxmeter Luminometer Tester Photometer Digital LCD Light Meter LX101, if you need Luxmeter Luminometer Tester Photometer Digital LCD Light Meter LX101, or have any questions about Luxmeter Luminometer Tester Photometer Digital LCD Light Meter LX101, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of Luxmeter Luminometer Tester Photometer Digital LCD Light Meter LX101
NOTE: The package content is not included battery.Due to china post new rules can't send goods with battery.
Operation Instruction
1Turn on the Lux Meter
2Set the Range Switch to the desired position
3Point the sensor to the light source to be tested
4Read the reading on the display
If the Range Switch is in the “x10”position, multiply the reading by 10 to get the measurement result
If the Range Switch is in the “x100”position, multiply the reading by 100 to get the measurement result
Note: For a higher accuracy, use the lowest possible range
5If the display shows the overload indicator “1”, you should set the Range Switch to a higher position
6Turn off the Lux Meter when the measurement is completed
Features
High accuracy
Quick measurement
Easy readout, with unit indication
Auto zero adjust
General Specification
Display: 3 1/2 Digit LCD, with a max, reading of 1999
Measurement Range:1Lux~50000Lux in 3 ranges
(2000Lux, 20000Lux and 50000Lux)
Sampling Rate: about 2 times/sec
Sensor: silicon photodiode & filter
Operating Environment:0~40Celsius degree
Storage Environment:-10~50 Celsius degree
Overload Indication:1 shown on the display
Battery: 9V, 6F22 or equivalent, a piece
Size: Sensor Unit: 112x53x16mm;Main Body:146x70x33mm
Weight: about 210g (including)
Go to Buy: Luxmeter Luminometer Tester Photometer Digital LCD Light Meter LX101