KEYDIY KD-MINI PROG（With C2 Adapter) Read Data Support VW MQB Work with KD-MATE to Add Key With All Keys Lost

KEYDIY KD-MINI PROG is specially designed for reading dashboard data, support VW MQB. Working with KD-MATE to add key. It can also adds key with all keys lost. It is a necessary tool for locksmiths.

UKOBD2 Provide top quality KEYDIY KD-MINI PROG（With C2 Adapter) Read Data Support VW MQB Work with KD-MATE to Add Key With All Keys Lost, if you need KEYDIY KD-MINI PROG（With C2 Adapter) Read Data Support VW MQB Work with KD-MATE to Add Key With All Keys Lost, or have any questions about KEYDIY KD-MINI PROG（With C2 Adapter) Read Data Support VW MQB Work with KD-MATE to Add Key With All Keys Lost, welcome to contact us.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools

images of KEYDIY KD-MINI PROG（With C2 Adapter) Read Data Support VW MQB Work with KD-MATE to Add Key With All Keys Lost

KEYDIY KD-MINI PROG (With C2 Adapter) – Read Data Support for VW MQB

This product is specially designed for reading dashboard data and supports VW MQB platforms. When used with KD-MATE, it enables key addition—even in all-keys-lost scenarios—making it an essential tool for professional locksmiths.

Adapter Board Functions

C1 Adapter Board Function

• Supports EEPROM (95xxx) series 8-pin chip data reading, such as 95160, 95320, 95640, 95128, 95256, 95512, etc.
• Supports EEPROM (93xxx) series 8-pin chip data reading, such as 93C86 and 93C66.

Reading method: Weld the 8-pin chip onto the C1 adapter board and insert it into the KD-MINI PROG, as shown in the figure. Open the Mobile KD app, enter the KD-MINI PROG section, select the desired chip model, and read the chip data.

C2 Adapter Board Function

Using the C2 adapter board with the KD-MINI PROG allows reading of D70F35xx, D70F34xx, and R7F7014xx series instrument clusters without cutting or warping. The specific instrument wiring diagram is available in the Mobile KD app.

Product Specifications

• Standby current: ≤15 mA
• Working current: ≤180 mA
• Working temperature: -20℃ to 85℃
• Working humidity: 20% – 100%

Steps for Reading Data

1. Select the connection diagram based on the dashboard model (available in the Mobile KD app under Immo Programming → KD Mini Prog). Weld the cable harness to the corresponding position on the instrument according to the wiring diagram.
2. Insert the cable harness plug into the KD-MINI PROG port and connect the KD-MINI PROG to KD-MAX (or an Android phone/tablet that supports OTG), as shown in the image above.
3. Open the Mobile KD app, navigate to Immo Programming → KD Mini Prog, and initiate the data read process (may take 5–10 seconds). Note: Ensure KD-MAX or your mobile device has sufficient power to prevent read failure.

Disclaimer

Before use, please carefully read the product manual and strictly follow the installation and usage instructions. Our company shall not be held responsible for any personal injury or property damage resulting from improper use.

Package Includes

• 1 pc × Host
• 1 pc × OTG cable
• 1 pc × Special cable harness
• 1 pc × Adapter plate
• 1 pc × Quality certificate

Go to Buy: KEYDIY KD-MINI PROG（With C2 Adapter) Read Data Support VW MQB Work with KD-MATE to Add Key With All Keys Lost