KT4000/KT5000 Digital Reptile Dimming Aquarium Temperature Controller Outlet PID Heating Cool Chauffage Regulator Thermostat EU/UK Plug
KT4000/KT5000 Digital Reptile Dimming Aquarium Temperature Controller Outlet PID Heating Cool Chauffage Regulator Thermostat EU/UK Plug, fit for different operating requirements of users. Wholesale Digital Reptile Dimming Aquarium Temperature Controller
UKOBD2 Provide top quality KT4000/KT5000 Digital Reptile Dimming Aquarium Temperature Controller Outlet PID Heating Cool Chauffage Regulator Thermostat EU/UK Plug, if you need KT4000/KT5000 Digital Reptile Dimming Aquarium Temperature Controller Outlet PID Heating Cool Chauffage Regulator Thermostat EU/UK Plug, or have any questions about KT4000/KT5000 Digital Reptile Dimming Aquarium Temperature Controller Outlet PID Heating Cool Chauffage Regulator Thermostat EU/UK Plug, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of KT4000/KT5000 Digital Reptile Dimming Aquarium Temperature Controller Outlet PID Heating Cool Chauffage Regulator Thermostat EU/UK Plug
- Blue tape LCD display, simple operation
- Temperature adjusted per 0.1°C
- Two timers can be set during 24 hours
- Separate Day and Night Temperature can be set.
- Real Time Clock - An inbuilt real-time clock to control the light so simulating the day and night as in the real environment. One Heating/Cooling socket plus one timer socket help to set timing output function
- Can be used in both wet and dry environments
- Small and elegant appearance, can adopt attached on the glass, or stand on the table, or install into the aquarium and terrarium, fit for different operating requirements of users.
Model Number | KT5000 |
Temperature Measuring Range | 0°C~50°C |
Temperature Controlling Range | 0°C~50°C |
Resolution | 0.1°C |
Measuring Accuracy | 1.0°C |
Power Supply | 220V AC+/-15% |
Input | 1 NTC Sensor |
Timer Output | Resistance load MAX 1100W, Inductive load MAX 275W, Incandescent bulb MAX 220W |
Heating Output | Resistive load MAX 440W |
Working Temperature | -10°C~60°C |
Working Humidity | 20%~85% |
Power Consumption | <=3W |
Key Sound | YES |
Size of the display | 92x50x6.5mm |
PID Control | YES |
Menu item | Set | Default value | Remark |
HEAT(MODE) | HEAT | HEAT | |
Daytime Temperature(SET) | 0.0~50.0°C | 25°C | Set step 0.1°C |
Nighttime Temperature(SET) | 0.0~50.0°C | 20°C | |
Daytime FROM | 00:00—22:59 | 08:00 | |
Daytime TO | 01:00—23:59 | 18:00 | If TO time is earlier than FROM time, display error message "ERR". |
Alarm over temperature | 0.0~5.0°C | 5.0°C | Set step 0.1°C |
First Timing control L1: ON: FROM, OFF: TO | 00:00~23:59 | 00:00~06:00 | Disabled if FROM and TO are same |
Second Timing control L2: ON: FROM, OFF: TO | 00:00~23:59 | 12:00~18:00 | Disabled if FROM and TO are same |
Real Time | 00:00~23:59 | Real-time | |
- Heating and cooling relay output.
- Two temperature setpoint. easy to use.
- Plug and play design. Reading with Celsius(°C) unit.
- Compressor Delay protection function ( 0-10min, default: 0 min)
- Temperature calibration function (-10~10°C, default: 0°C)
- Alarm when temp exceed temperature limit or sensor error
- All parameters setting can be saved after short circuit.
- Refrigerating control output delay protection
- Can be used for aquarium, pet breeing, domestic freezer,incubator, BBQ, water tanks, refrigerator, industrial chiller,steamer, industrial equipment and other temperature controlled system.
- Power Supply: 220Vac±15% , 50
- Temperature control range:-50~99°C, default: 20°C
- Resolution: 0.1°C, adjustment step: 0.1°C
- Accuracy: +/-1°C
- Heating differential value:0.5~20 °C, default: 2°C
- Cooling differential value:0.5~20°C, default: 2°C
- Sensor input: NTC Waterproof sensor 3m/9.84ft
- Relay contact capacity: Cool Heat 10A
- Power consumption: ≤3W
- Temperature control range :-50~99°CHeating differential value:0.5~20°CCooling differential value:0.5~20°CSensor input:NTC Waterproof sensor2m/9.84ftRelay contact capacity:Cool Heat(10A@220Vac each)Ambient temperature:-20-60°Chumidity:20% -85%RHHeating and Cooling Relay output:yesCooling Delay start:YesTemperature calibration :yesData saved when power off :yesAlarm:Alarm when temp exceed temperature limit or sensor errorCodeFunctionSet RangeDefaultLSTemperature set value-50~99℃20°CHdHeating differential value0.5~20°C2°CLdCooling differential value0.5~20°C2°CPLSet cooling delay output0~10 minutes1AHHigh temperature alarm-50~99°C99°CALLow temperature alarm-50~LS1°C-50°CCATemperature Calibration-10~10°C0°CReset:long press UP and DOWN buttons for 3 seconds
- 1 x temperature controller
- 1 x waterproof sensor