DiaLink J2534 Smsdiag3 OBDII Diagnostic Interface = K-line + ELM327 + D-CAN Cable
Dialink J2534 compatible adapter; Being supplied together with the J2534 interface library, Dialink can be used for ECU reprogramming with CombiLoader or for diagnostics with any third-party tools;Suitable for SMS-Diagnostics 3;
UKOBD2 Provide top quality DiaLink J2534 Smsdiag3 OBDII Diagnostic Interface = K-line + ELM327 + D-CAN Cable, if you need DiaLink J2534 Smsdiag3 OBDII Diagnostic Interface = K-line + ELM327 + D-CAN Cable, or have any questions about DiaLink J2534 Smsdiag3 OBDII Diagnostic Interface = K-line + ELM327 + D-CAN Cable, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of DiaLink J2534 Smsdiag3 OBDII Diagnostic Interface = K-line + ELM327 + D-CAN Cable
DiaLink J2534 Smsdiag3 OBDII Diagnostic Interface
Overview
Dialink application:
- J2534 compatible adapter
- Supplied together with the J2534 interface library, enabling ECU reprogramming with CombiLoader or diagnostics with any third-party tools
- Suitable for SMS-Diagnostics 3
- When used with SMS-Diagnostics 3 software, it supports diagnostics of modern vehicle control systems via the standard SAE J1962 diagnostic connector (connection to other diagnostic connectors is possible using additional adapters)
Application
- The DiaLink J2534 adapter includes an interface library and can be used to reprogram vehicle computers in conjunction with loaders
- The SMS-Diagnostics 3 program enables diagnostics of modern vehicle control systems using an SAE J1962 connector; compatibility with other connectors is achieved through adapters
Benefits
- Diagnostics and programming of trucks operating at 24 volts
- Superior compliance with J2534 standards compared to competing devices
- Provides Bluetooth wireless connectivity
- Data transfer rate matches the maximum throughput of the ISO-11898 (CAN) bus
- Connectivity options: USB or Bluetooth
Supported Protocols
- ISO-11898 / ISO-15765 (CAN)
- ISO-9141 / ISO-14230 (K/L-Line)
- J1850 VPW / PWM
Power Supply
- 12-volt vehicle power
- 24-volt vehicle power
- USB powered
- Operating voltage range: 8–35 volts
Used Diagnostic Connector Pins
- Pin 2 (BUS+) / Pin 10 (BUS–): J1850 VPW / PWM (Ford / GM / Chrysler, etc.)
- Pins 4 / 5: Ground
- Pin 6 (CAN-H) / Pin 14 (CAN-L): ISO-11898 / ISO-15765 CAN
- Pin 7 (K-Line) / Pin 15 (L-Line): ISO-9141 / ISO-14230 K/L-Line (bidirectional lines)
- Pin 16: Power
Additional Functionality via Built-in Microprocessor
The DiaLink J2534 adapter supports operation with various diagnostic programs through:
- K-Line: Compatible with any software designed for a standard USB K-Line adapter
- D-CAN: Works with BMW diagnostic software via EDIABAS (STD: OBD driver), supporting both K-bus and CAN-bus
- ELM327: Compatible with software designed for the popular ELM327 microcontroller (this mode will be enabled via a future firmware update)
DiaLink J2534 vs. OpenPort Adapter
- Better J2534 standard compliance compared to software used with the OpenPort adapter
- DiaLink J2534 offers up to 8 times faster performance based on the ISO-11898 (CAN) standard
Packing List
1 set × DiaLink J2534 Smsdiag3 Diagnostic Cable
Go to Buy: DiaLink J2534 Smsdiag3 OBDII Diagnostic Interface = K-line + ELM327 + D-CAN Cable