Ad-blue-OBD2 Emulator for BENZ Trucks Plug and Drive Ready Device by OBD2
Ad-blue-OBD2 BENZ ad-Blue/DEF and NOx Emulator via OBD2 Plug and Drive Ready Device! Drive your truck without Diesel Exhaust Fluid!
UKOBD2 Provide top quality Ad-blue-OBD2 Emulator for BENZ Trucks Plug and Drive Ready Device by OBD2, if you need Ad-blue-OBD2 Emulator for BENZ Trucks Plug and Drive Ready Device by OBD2, or have any questions about Ad-blue-OBD2 Emulator for BENZ Trucks Plug and Drive Ready Device by OBD2, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of Ad-blue-OBD2 Emulator for BENZ Trucks Plug and Drive Ready Device by OBD2
Ad-blue-obd2 Emulator for BENZ Trucks Plug and Drive Ready Device by OBD2
Top 5 Reasons to Get Ad-blue-obd2 Emulator for BENZ Trucks:
1. Ad-blue-obd2 is very easy to install. Just Plug it into OBD2 connector of Truck or bus and remove the fuses mentioned.
2. Ad-blue-obd2 will override AD-Blue system instantly, it will stop the usage of ad-Blue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. Ad-blue-obd2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. Ad-blue-obd2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug ad-blue-obd2 from OBD2 connector.
Ad-blue-obd2 for BENZ Trucks Description:
Ad-blue-obd2 is a Plug&Drive Ready device to mulate working ad-Blue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged ad-Blue SCR system.
Installation and Calibration for BENZ Trucks:
1.Pull the Key out from the ignition
2.Remove the following Fuses (MERCEDES BENZ)
F1
3.Plug Ad-blue-obd2 into OBD2 connector
4.Turn on the ignition and check the level of ad-Blue, if it shows 50% or 70%
5.If any fault light appears on dashboard, delete via service scanner
Legal Notice:
Ad-Blue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use ad-Blue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your ad-Blue/DEF tank.
Certificates: CE/RoHS
Package including:
1pc x Ad-blue-obd2 Emulator Box Interface
1pc x User Manuel English
Top 5 Reasons to Get Ad-blue-obd2 Emulator for BENZ Trucks:
1. Ad-blue-obd2 is very easy to install. Just Plug it into OBD2 connector of Truck or bus and remove the fuses mentioned.
2. Ad-blue-obd2 will override AD-Blue system instantly, it will stop the usage of ad-Blue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. Ad-blue-obd2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. Ad-blue-obd2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug ad-blue-obd2 from OBD2 connector.
Ad-blue-obd2 for BENZ Trucks Description:
Ad-blue-obd2 is a Plug&Drive Ready device to mulate working ad-Blue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged ad-Blue SCR system.
Installation and Calibration for BENZ Trucks:
1.Pull the Key out from the ignition
2.Remove the following Fuses (MERCEDES BENZ)
F1
3.Plug Ad-blue-obd2 into OBD2 connector
4.Turn on the ignition and check the level of ad-Blue, if it shows 50% or 70%
5.If any fault light appears on dashboard, delete via service scanner
Legal Notice:
Ad-Blue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use ad-Blue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your ad-Blue/DEF tank.
Certificates: CE/RoHS
Package including:
1pc x Ad-blue-obd2 Emulator Box Interface
1pc x User Manuel English
Go to Buy: Ad-blue-OBD2 Emulator for BENZ Trucks Plug and Drive Ready Device by OBD2