Cheap Ad-Blueobd2 Emulator For RENAULT Trucks Override AD-Blue System Instantly
Cheap ad-Blueobd2 Emulator for RENAULT Trucks1.AD-Blue/DEF and NOx Emulator works via OBD22.Plug and Drive Ready Device!3.Drive your truck without Diesel Exhaust Fluid!
UKOBD2 Provide top quality Cheap Ad-Blueobd2 Emulator For RENAULT Trucks Override AD-Blue System Instantly, if you need Cheap Ad-Blueobd2 Emulator For RENAULT Trucks Override AD-Blue System Instantly, or have any questions about Cheap Ad-Blueobd2 Emulator For RENAULT Trucks Override AD-Blue System Instantly, welcome to contact us.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Porsche Piwis III, USB Link 2, Scania VCI3, CAN Clip, wiTech MicroPod 2, T300 key programmer, locksmith tools
images of Cheap Ad-Blueobd2 Emulator For RENAULT Trucks Override AD-Blue System Instantly
Drive your
Truck without Diesel Exhaust Fluid!
ad-BlueOBD2 is a Plug & Drive Ready device to emulate working ad-Blue systems and NOx sensors on
Trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged ad-Blue SCR system.
AD-Blue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use AD-Blue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your ad-Blue/DEF tank.
Top 7 Reasons to Get Ad-blue OBD2:
1. ad-BlueOBD2 is a device which can be plugged into OBD2 connector of your truck to emulate working
2. ad-Blue system and NOx sensor on trucks, even with damaged ad-Blue SCR system.
3. ad-BlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
4. ad-BlueOBD2 will override AD-Blue system instantly, it will stop the usage of ad-Blue liquid and disable Nox sensors.
5. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
6. ad-BlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
7. ad-BlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug ad-BlueOBD2 from OBD2 connector.
AD-BlueOBD2 Installation and Calibration:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (
Renault)
25A
P59
3. Plug ad-BlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of ad-Blue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
Go to Buy: Cheap Ad-Blueobd2 Emulator For RENAULT Trucks Override AD-Blue System Instantly