read Bosch ECU pincode with OBDSTAR P003
OBDSTAR P003 KIT P003 Adapter with ECU Bench Cables Working With OBDSTAR X300 DP/ X300 DP PLUS/ X300 PRO4/ Key Master DP
OBDSTAR P003 KIT Bench/Boot Adapter for Reading ECU CS PIN Working With OBDSTAR X300 DP/ X300 DP PLUS/ DC706/ X300 PRO4/ Key Master DP/ MS80 is a one of our read Bosch ECU pincode with OBDSTAR P003 Tools, you can buy OBDSTAR P003 KIT Bench/Boot Adapter for Reading ECU CS PIN Working With OBDSTAR X300 DP/ X300 DP PLUS/ DC706/ X300 PRO4/ Key Master DP/ MS80 from ukobd2.com.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150
images of OBDSTAR P003 KIT Bench/Boot Adapter for Reading ECU CS PIN Working With OBDSTAR X300 DP/ X300 DP PLUS/ DC706/ X300 PRO4/ Key Master DP/ MS80
OBDSTAR P003 Kit with P003 Adapter and ECU Bench Cables
The OBDSTAR P003 Kit is compatible with OBDSTAR IMMO series tablets—including the X300 DP, X300 DP Plus, X300 PRO4, and Key Master DP—and is designed for reading BOSCH ECU data, CS, Pincode, and more. Supported vehicle brands include Audi, Citroën, DS, Mahindra, Peugeot, Škoda, SEAT, Volkswagen, and others. Additional models are under development.
Key Features of the OBDSTAR P003 Kit
- Portable Design
- Easy Operation
- High Performance
Supported ECU List
The OBDSTAR P003 Kit supports a wide range of BOSCH ECUs, including:
- EDC17U01 (TC1766)
- MED17.5 (TC1766)
- MED17.5.1 (TC1766)
- MED17.5.20 (TC1766)
- MED17.5.5 (TC1766)
- MED17.5.5 HW2 (TC1766)
- EDC17C46 (TC1767)
- ME17.5.6 (TC1767)
- ME17.5.20 (TC1767)
- MED17.5.2 (TC1767)
- MED17.5.5 (TC1767)
- MED17.5.5 HW2 (TC1767)
- MED17.5.21 (TC1782)
- MED17.5.25 (TC1782)
- EDC17C54 (TC1797)
- EDC17C64 (TC1797)
- EDC17CP44 (TC1797)
- EDC17CP44 MS (TC1797)
- ME17.1.1 (TC1797)
- ME17.1.6 (TC1797)
- MED17.1.1 (TC1797)
- MED17.1.1 MS (TC1797)
- MED17.1.6 (TC1797)
- MED17.4.4 (TC1793)
- MD1CS018 (Euro 6/TC298TP)
- MG1CS042 (Euro 6/TC298TP)
- MG1CS003 (Euro 6/TC298TP)
...and more.
Kit Overview
- Diag cable OBD connector (male)
- P003 connector (female)
- P003 adapter
- Boot jumper (spring needle)
- Boot jumper (welding)
- ECU pin connector
- ECU boot connector
- 12V power
Connection Methods
Bench Mode
- Connect components 1, 2, and 3 together as shown in the image below:
- Connect the ECU pin connector to the ECU according to the wiring diagram.
- Connect the 12V power to the diagnostic device.
- Read data on the diagnostic device.
Boot Mode
- Connect components 1, 2, and 3 together as shown in the image below:
- Connect the ECU pin connector to the ECU according to the wiring diagram.
- Connect component 7 with either component 4 or 5, then connect it to the ECU.
- Connect the 12V power to the diagnostic device.
- Read data on the diagnostic device.
Specifications
- Voltage: 12V
- Weight: 100g
- Dimensions: 113 × 75 × 31 mm
Package Contents
- 1 × P003 adapter
- 1 × Set of ECU BENCH cables
