rd108x remote controller

RD108X Steelmate Rolling Code Mutual-Duplicating Remote Controller 433MHZ 5pcs/lot

Suitable for remote control rolling code chip: HCS200 and HCS201, specially for mutual duplicating Steelmate Remote Control.

Number of buttons: 3 buttons (lock button, unlock button, rear box button)

Battery:2016*2 Working Voltage: 6V

Parts: Pins, key blank

Frequency: 433MHZ

Dimensions: 35 × 71 × 21mm

Weight: 0.063kg

1.Clear code:

It’s necessary to clear the original codes of the copy code remote control.
Press and hold the “unlock” button and “luck” button simultaneously for 2 seconds till the LED indicator flashes 3 times.
Keep pressing the “lock button” button and release the “unlock” button, then press the “unlock” button for 3 times within 5 seconds.
The LED indicator fast flashes 2 times to indicate the code clear is finished.

2.Copy code:

Firstly mutual duplicating “luck” button, then “unlock” button.

3.Retrieve Code:

In case if you lost the codes you are using by accident, don’t worry you can retrieve them by following the step below:

firstly mutual duplicating “unlock” button, then match key in the car.

5pcs x RD108X Steelmate Rolling Code Mutual-Duplicating Remote Controller 433MHZ