OPCOM V2010 diagnostic tool support almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B. It enables you to read and clear fault codes,support many control units.
OPCOM OP-COM 2010 V CAN OBD2 for OPEL is a one of our opcom 2010 Tools, you can buy OPCOM OP-COM 2010 V CAN OBD2 for OPEL from ukobd2.com.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150
Opcom Can OBD2 2010 Version for OPEL
Software Version: 2010V
Language: English, German
Attention: Please do not use 2010 version software or try to update online for this interface,or it will get damaged, and have to return back to us for repair.
Opcom 2010V Function:
1.The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
2.The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
3.Since OPEL uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
4.Fault codes will be shown with all available information:
Opcom 2010V Full fault code text description
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You Can Also Run Output Tests on Many Controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
Package including:
1.OP COM Interface
2.USB Cable
3.Software and Drivers CD
OP-COM 2010 Circuit Board:
Go to Buy: OPCOM OP-COM 2010 V CAN OBD2 for OPEL