XProg-M Xprog m V5.55 V6.12 V6.17 V6.26 V6.50 ECU Chip Tunning Programmer X Prog M Box 6.26 6.12 6.50 XPROG-M 5.55
XProg-M Xprog m V5.55 V6.12 V6.17 V6.26 V6.50 ECU Chip Tunning Programmer X Prog M Box 6.26 6.12 6.50 XPROG-M 5.55 is a one of our Xprog m V555 V612 V617 Tools, you can buy XProg-M Xprog m V5.55 V6.12 V6.17 V6.26 V6.50 ECU Chip Tunning Programmer X Prog M Box 6.26 6.12 6.50 XPROG-M 5.55 from ukobd2.com.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150
XPROG-M V5.84 using tips:
1. You are not allowed to use this newest dongle to update the older version Xprog to V5.84
2. Close all of the computer anti-virus software. If not, X-prog software may be killed.
3. Disconnect the internet. If not, the internet maybe damage the hardware.
4.
Uninstall all of the old version xprog-m or xprog box software before
you install V5.84 software we provide, because our xprog-box hardware is
not compatible with other lower or higher version software, otherwise
the hardware will be damaged and will lose its warranty...
5. Never try to UPDATE, the hardware will be damaged if you want to try to update it online, then you will lose its warranty.
XPROG-M V5.84 Authorizations:
AUTH-0001 for M-otorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 for M-otorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 for M-otorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 for M-otorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 for Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006
for M-otorola HC05Bxx and HC05Xxx family bypass security authorization
(allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 for BMW EWS3 authorization
AUTH-0009 for ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 for MB ZGS001 authorization
AUTH-0011 for M-otorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015
MPC5xx authorization (depending on device program automatically detects
MPC5xx, M95xxx device type, flash, external flash and configuration
memory size)
AUTH-0018
for M-otorola HC12, HC912, MC9S12, MC9S12X bypass security
authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021
ARM (Micronas, ...) Family bypass security authorization (allows to
read/write secured and non-secured internal flash and external serial
EEPROM, view/change mileage, Chassis number (VIN), serial nuMBer and PIN
code).
AUTH-0023-1 MAC7xxx
AUTH-0023-2 XC23xx
AUTH-0024-1 MC9S12Cxx
AUTH-0024-2 MC9S12XE
AUTH-0024-3 9S12XE SECURITY
AUTH-0024-4 MC9S12HA/HY/P
AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13
AUTH-0027-1 HC(S)908 update Authorized 2016/3/13
AUTH-0027-2 HC(S)908 sercurity Authorized 2016/3/13
AUTH-0028-1 for Renesas V850 Authorized 2017/10/9
AUTH-0028-2 for Renesas SuperH Authorized 2017/10/9
XPROG-M V5.84 Adapters:
ADP-0001 TMS370 PLCC28 programming adapter
ADP-0002 TMS370 PLCC44 programming adapter
ADP-0003 TMS370 PLCC68 programming adapter
ADP-0004 for M-otorola HC05B/X PLCC52 programming adapter
ADP-0005 for M-otorola HC05B/X QFP64 programming adapter
ADP-0006 ST M35080 in-circuit programming adapter
ADP-0008 TMS374 family in-circuit programming adapter
ADP-0009 MC68HC05V12 programming adapter
ADP-0010 TMS374 on-board programming adapter
ADP-0011 HC11EA9/E9 programming adapter
ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter
Additional adaptor for 5M48H P-Flash
ADP-0019 Rev.A
EWS3 adaptor
EEPROM adaptor
QFP28 adaptor
QFP64 adaptor
QFP80 adaptor
QFP112 adaptor
QFP144 adaptor
XPROG-M V5.84 Software Display: