THINKCAR Thinkscan Plus S2 OBD2 Automotive Scanner

THINKCAR Thinkscan Plus S2 OBD2 Automotive Scanner Professional Engine ABS SRS System Code Reader 3 Reset Car Diagnostic Tool

THINKCAR Thinkscan Plus S2 OBD2 Automotive Scanner Professional Engine ABS SRS System Code Reader 3 Reset Car Diagnostic Tool is a one of our THINKCAR Thinkscan Plus S2 OBD2 Automotive Scanner Tools, you can buy THINKCAR Thinkscan Plus S2 OBD2 Automotive Scanner Professional Engine ABS SRS System Code Reader 3 Reset Car Diagnostic Tool from ukobd2.com.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150

images of THINKCAR Thinkscan Plus S2 OBD2 Automotive Scanner Professional Engine ABS SRS System Code Reader 3 Reset Car Diagnostic Tool

THINKCAR Thinkscan Plus S2 OBD2 Automotive Scanner Professional Engine ABS SRS System Code Reader 3 Reset Car Diagnostic Tool

What is THINKSCAN Plus S2？

Thinkscan Plus S2 products are a new generation of mid-to-high end DIY products based on Android system launched by THINKCAR, which can realize online upgrade of diagnostic software. Its main functions include not only OBD/EOBD standard protocol diagnosis, but more importantly, it has professional vehicle diagnostic software and maintenance software, which can perform a comprehensive diagnosis of all vehicle electronic control systems. Different series support different systems and functions.

Why You Need THINKSCAN Plus S2?

"Are you troubled by the renewal of model software and functions? THINKSCAN Plus S2 Support to 3 Systems(Engine/ABS/SRS) and you could choose 2 Reset services lifetime free.
1.Thinkscan Plus S2 Support to diagnostic Engine/ABS/SRS system errors, and delete the errors.
2.Thinkscan Plus S2 supports to do Full obd 2 function,including Read/Clear codes,data stream,I/M readiness,O2 sensor,DTC look up and more....
3. Thinkscan Plus S2 can do 2 reset revices functions like you choose.
4.You can do screen shortcuts via I/M key with Thinkscan Plus S2 devices, easy and fast
5.Thinkscan Plus S2 Support to printe Diagnostic Report data, checking errors
6.Thinkscan Plus S2 software update free lifetime."

THINKSCAN Plus S2 can read fault codes of Engine+ABS+SRS Airbag 3 Systems

*Provide TWO Advanced Maintenance Service Mode Reset Function lifetime free.
*And the company provides 28 Maintenance Service Reset Reserved functions for users to buy when need.
*Though each Reset functions worths hundreds of pounds, you can access to one reset by subscribing at USD 29.95, and can use for 12 months.

What is Diagnostic Scan for Engine+ABS+SRS Airbag 3 Systems?

When the warning lights on, you can use this tool to scan fault codes for Engine, ABS, SRS.
It will tell you whatis wrong with the 3 systems. Can help you save money before you take the car to garage.

THINKSCAN Plus S2 can scan 3 modules: Engine+ABS+SRS Airbag 3 System
Read fault codes, help you locate problem, and after you fix problem, erase codes.

What is "Maintenance" Reset Service Mode?

The functions are more advanced than code reading,It can be activated, or re-write, reset data into ECU, calibration, adaptation, or match. Kind of helping you fix car problems.

THINKSCAN Plus S2 offers 2 reset service

Though most reset can only to be done in garage by professional mechanic, each reset can cost hundreds even thousand pounds, some reset are not that complicated, and can be DIY by car owners, such as DPF Regeneration, EPB, SAS.
Our supplier invested billion to develop this new generation tool and present 28 maintenance service reset functions.

And as promotion, now our customers can choose 2 reset for free out of 28 reset.

And can also buy extra reset functions at only USD 29.95 each reset / per year.
If you want to use extra 2 reset, cost is USD 29.95 x 2

The Reset Functions may not work on your car,please ask seller before order.

Just need to tell me below information, will check for free.
1.Your car's maker, brand, model, made year, and VIN number (17 character, not license plate number)
2.What Reset Service functions you need.
3. If there are warning light on, Send clear pictures to show the warning lights on dashboard.

Example of Maintenance Service Functions: Steering Angle Sensor (SAS) Calibration (NOT FREE, choose or buy in scanner)

SAS Calibration menu lets you perform calibration of the steering angle sensor, which permanently stores the current steering wheel position as straight-ahead in the sensor EEPROM. On successful calibration of the sensor, its fault memory is automatically cleared.

3 System(ABS+Engine+SRS)

Engine System:
The diagnostic tool can help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission.

ABS System:
Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this scanner does for you.

SRS Airbag System:
SRS, safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status.

10 Full OBDII Functions

Reading Codes

Show the detailed description of the Diagnostic Trouble Code (DTCs)

Erasing Codes & Reset

Turns off Check Engine Light (MIL), clears codes and resets monitors.

Data Stream

Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

I/M Readiness Status

Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Read Live Data Stream

Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

View Freeze Frame Data

Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

O2 Sensor Test

Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

On-Board Monitor Test

Retrieves and displays test results for emission-related powertrain components and systems.

Read Vehicle Information

Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

Component Test

Certain vehicle components can be actuated by commands sent from the scanner to test their operability

28 Reset Function

Two reset functions can be selected arbitrarily

The THINKCAR Thinkscan Plus S2 supports 28 commonly used special reset functions, allowing you to quickly access the vehicle system for various scheduled services, maintenance and reset performance, eliminating the need to reset the car after solving common problems Troubles.Listed some commonly used special reset services for your reference:

1.Oil Lamp Reset Service

Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

2.EPB Electronic Park Brake Reset

It is important in the maintenance of electronic braking system's safety and efficiency.

3.BAT battery service

Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

4.DPF Diesel Particulate Filter Reset

Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

5.SAS Steering Angel Sensor Reset

Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

6.TPMS Tire Pressure Monitoring System Reset

Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

7.IMMO Key Programming

The unique car Key Programming and read pin code function, it is mainly used to disable the lost vehicle keys and program a new replacement key fob.

8.ABS Bleeding

ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

9.Sunroof Reset

The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

10.Suspension Reset

Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

11.Gearbox (Transmission )Reset

Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.

12.AFS Headlamp Reset

'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

13.Injector Coding

Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

14.Throttle Adaptation

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.

15.Gear Learning

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

16.EGR Reset

Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.

17.A/F Reset

This function is applied to set or learn Air/Fuel ratio parameters.

18.Adblue Reset(Diesel Engine Exhaust Gas Filter)

After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.

19.Airbag Reset

This function resets the airbag data to clear the airbag collision fault indicator.

20.Coolant Bleeding

Use this function to activate the electronic water pump before venting the cooling system.

21.AT Learning

This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift

22.Language Change

This function is used to change the system language of the vehicle central control panel.

23.Nox Sensor Reset

Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.

24.ODO Reset

a) ODO reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage.
b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it
is necessary to do ODO reset after maintenance.

25.Stop/Start Reset

This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).

26.Seat Calibration

This function is applied to match the seats with memory function that are replaced and repaired.

27.Transport Mode

ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.

28.Windows Calibration

This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.

Other features of the product

Thinkcar Thinkscan plus S2 diagnostic Scanner support 7 languages

English, Russian, Spanish, Portuguese, French, Japanese, German,Italian

Support more than 220+ Car Brands:

For ASTONMARTIN ；For AUDI ；For BENZ ；For BMW ；For CHRYSLER ；For CITROEN ；For DAEWOO ；For FERRARI ；For FIAT ；For GM ；For HONDA ；For HYUNDAI ；For JPISUZU ；For KIA ；For LANDROVER ；For MASERATI ；For MAZDA ；For MITSUBISHI ；For NISSAN ；For OPEL ；For PEUGEOT ；For PORSCHE ；For RENAULT ；For ROVER ；For SAAB ；For SEAT ；For SGM ；For SKODA ；For SMART ；For SPRINTER ；For SSANGYONG For SUBARU ；For SUZUKI ；For TOYOTA ；For USA FORD ；For VOLVO ；For VW ；More...