Car Battery Chargers Topdon T1200 6V 12V Motorcycle Battery Chargers for Lead Acid Lithium Battery Auto Booster Jump Starter
Car Battery Chargers Topdon T1200 6V 12V Motorcycle Battery Chargers for Lead Acid Lithium Battery Auto Booster Jump Starter is a one of our T1200 6V 12V Motorcycle Battery Chargers Tools, you can buy Car Battery Chargers Topdon T1200 6V 12V Motorcycle Battery Chargers for Lead Acid Lithium Battery Auto Booster Jump Starter from ukobd2.com.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150
Description:
TOPDON 1200 is a smart Automatic Car Battery Charger for 6V/12V lead-acid and 12V lithium-acid batteries (Lithium Battery Charger ) up to 80 amp-hours, with twice the charging speed,5 charging steps, 5 charging modes,light weight, portability, ease of use, compact design and other extraordinary features,provide highly safe and reliable solution for charging,repairing,maintaining various batteries.
Specification:
Input Voltage AC: 100-240VAC, 50-60Hz
Working Voltage AC: 100-240VAC, 50-60Hz
Efficiency: 85% Approx.
Power: 25W Max
Charging Voltage: Various
Charging Current: 1.2A(12V);1.2A(6V)
Low-Voltage Detection: 1V(12V),1V(6V)
Back Current Drain: < 5mA
Working Temp.: 14°F to 104°F (-10° to 40°C)
Storage Temp.: 0° to 130°F (-17°C to 54°C)
Charger Type: 10 Step, Smart Charger
Type of Batteries: 6V & 12V
Battery Chemistries: Wet, Gel, MF, CA, EFB, AGM & LIB
Battery Capacity: 10ah-80ah (6V&12V);Maintains All Sizes
Housing Protection: IP65
Cooling: Natural Convection
Dimensions:172*71.7*39.6mm(6.77*2.82*1.56 inches)
Weight:465g(1.03 lb)
PACKAGE LISTS:
1*TOPDON TORNADO1200
1*Cable Clamp
1*AC Cable
1*User Manual
This Automatic car battery charger has 5 manually selected charging modes for 6 and 12v batteries,to provide the best possible protection and maintenance, no matter the temperature
Using a unique charge algorithm,the TOPDON T1200 smarter battery charger goes through revolutionary 5 steps to constantly read and communicate with the battery, charging only to its direct needs,and therefore avoiding any possibility of incorrect charging
1.Battery Analysis & Diagnosis-Check the battery’s initial condition, including voltage, state-of-charge (SOC), and health, to determine if the battery is stable before charging.
2.Battery Desulphation-Use voltage or high-frequency pulses to break down the sulfates that have built up over time in your aging battery, to extend battery life, and optimize battery performance.
3.Battery Bulk Charge - Begin the Bulk charging process based on the condition of the battery, and return 80% of the battery’s capacity.
4.Absorption Mode - Bring the charge level to 90% by delivering small amounts of current to provide a safe, efficient charge. This limits battery gassing and is essential to prolonging battery life.
5.Battery Float Charge - Maintain the battery fully charged, without boiling out electrolyte or overcharging, to improve the battery life