Relay Tester

HAOSHI HS-2001 Automotive 12V Relay Tester Cordless Design Green/ Red

HAOSHI HS-2001 Automotive 12V Relay Tester Cordless Design Green/ Red is a one of our Relay Tester Tools, you can buy HAOSHI HS-2001 Automotive 12V Relay Tester Cordless Design Green/ Red from ukobd2.com.

Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150

images of HAOSHI HS-2001 Automotive 12V Relay Tester Cordless Design Green/ Red

HAOSHI HS-2001 Automotive 12V Relay Tester Cordless Design Green/ RedHAOSHI HS-2001 Automotive 12V Relay Tester Cordless Design Green/ RedHAOSHI HS-2001 Automotive 12V Relay Tester Cordless Design Green/ RedHAOSHI HS-2001 Automotive 12V Relay Tester Cordless Design Green/ RedHAOSHI HS-2001 Automotive 12V Relay Tester Cordless Design Green/ RedHAOSHI HS-2001 Automotive 12V Relay Tester Cordless Design Green/ RedHAOSHI HS-2001 Automotive 12V Relay Tester Cordless Design Green/ Red

HAOSHI Automotive 12V Relay Tester Cordless Design


Product Features:
Quickly test the condition of a 12V relay out of the vehicle.
Accurately check the relay for circuit breaks and switch contacts.
Test results provide good/bad indication: green LED=pass, red LED=fail
Fully self contained, no need to clamp cables onto the vehicle battery.
Product Highlights:
Reasonable design
The portable relay tester can be used in places without external power supply to test relays, which is convenient portable. Traditional relay testers must be connected to the car battery for testing, and they cannot stay away from the car battery. (Note: Please do not test the relay in an environment with high flammable gas concentration. If the relay causes poor contact, sparks appearing during the test may cause accidents.)
Practical and convenient
The product can be used with only 4 AA batteries, which are easy to replace.(Note: The product is shipped without batteries, please prepare batteries in advance.)
Thoughtful choice
The product adds an OFF button, which can be turned off after use, and it can extend battery life.
How to use it?
1. Install the enclosed 4-AA batteries into the back of the tester, replace cover.
2. Detemine if your relay has a 4-pin or 5-pin blade configuration.
3. Match the pattern to one of three blade receptacles on the relay and plug it in.
4. Slide the switch to either the 4-pin or 5-pin setting on the tester.
5. Press the test button.
HAOSHI Automotive 12V Relay Tester Cordless Design
Package Includes:

1pc x HAOSHI Automotive 12V Relay Tester Cordless Design Green

Go to Buy: HAOSHI HS-2001 Automotive 12V Relay Tester Cordless Design Green/ Red

LONSDOR Key Programmer Porsche Piwis III GM Tech2 USB Link 2 CAN Clip wiTech MicroPod 2 T300 key programmer locksmith tools a b c d e f g h i j k l m n o p q r s t u v w x y z
Share to Pinterest