Opcom cable
Opcom OP-Com Firmware V1.99 with PIC18F458 Chip and FTDI Chip CAN OBD2 Diagnostic Tool covers almost for all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
Opcom OP-Com Firmware V1.99 with PIC18F458 Chip and FTDI Chip CAN OBD2 Diagnostic Tool for Opel Supports Opel Till Year 2014 is a one of our Opcom cable Tools, you can buy Opcom OP-Com Firmware V1.99 with PIC18F458 Chip and FTDI Chip CAN OBD2 Diagnostic Tool for Opel Supports Opel Till Year 2014 from ukobd2.com.
Wholesale Top quality VAS6154, GM Tech2, VCM II For Ford, Handy Baby II Car Key Chip Copier, CDP DS150
images of Opcom OP-Com Firmware V1.99 with PIC18F458 Chip and FTDI Chip CAN OBD2 Diagnostic Tool for Opel Supports Opel Till Year 2014
Opcom OP-Com 2012V Firmware V1.99 Highlights:
1. Language: English
2. Software Version: 120309a Hardware Version: 1.99
3. OP-COM - PC based Opel diagnostic tool, work on Opel till year 2014
4. With PIC18F458 Chip, work more stable
5. It can work on both Windows XP and 7 now
OPCOM Function:
1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information:
Full fault code text description:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
Package list:
1pc x OP COM Interface
2pc x USB Cable
3pc x Software and Drivers CD